Fill Dirt in Jeff Davis County, TX

Prices vary with supply, truck distance, and material quality, but delivered fill-dirt in the Jeff Davis County area typically falls into a local range. Expect to see regional quotes rather than national flat rates; contact Hello Gravel with your zip code for an exact delivered price and any remote delivery fees.

Hello Gravel connects you with local suppliers around Fort Davis, Alpine and surrounding Trans-Pecos hubs that commonly serve Jeff Davis County. Many suppliers will haul 30-100 miles depending on truck availability and road access; for very remote sites expect fewer suppliers and higher haul charges, so request a local quote.

For building pads, use low-organic, well-graded compactable fill (engineered fill) with minimal fines and no topsoil; this compacts better under foundations. For driveways in this arid, rocky area, fill-dirt can be used as subgrade but should be capped with crusher run or class 2 base to provide drainage and surface strength.

Use cubic yards = area * depth(in) / 324. For 1,000 sq ft that is about 6.2 yd3 for 2", 12.4 yd3 for 4", and 18.5 yd3 for 6". In tons that typically equals roughly 7-10 tons for 2", 15-20 tons for 4", and 22-30 tons for 6" depending on moisture and compaction.

Place fill in 4" to 6" lifts and compact each lift as you go; small areas can be compacted with a heavy plate compactor while larger pads and driveways usually need a tandem roller or padfoot roller. For structural building pads have compaction tested to the engineer's spec (often 90-95% Standard Proctor); Hello Gravel can help coordinate material delivery but recommend hiring local earthwork contractors for compaction and testing.

Plain fill-dirt is generally poor for drainage because it contains fines that hold water; it is not a reliable erosion-control layer in flash-flood zones. For erosion-prone locations use engineered sections: geotextile, free-draining rock layers, and grade changes, and consult a local engineer or county flood guidance before placing material in arroyos or drainageways.

Fill-dirt is mostly soil and compacts to a dense subgrade but lacks the interlocking angular aggregate needed for a durable driveway surface. Crusher run or class 2 road base provides structural strength, drainage, and a longer-lasting surface; in Jeff Davis County we recommend using fill-dirt only as subgrade and topping with crusher run for driveways.

Permit needs vary by location: many rural properties in Jeff Davis County have minimal county grading rules, but Fort Davis or other incorporated areas may have building or driveway permits. Driveway work affecting state roads requires TxDOT approval; always check with Jeff Davis County Planning and the local city office and confirm any septic or floodplain restrictions before ordering material.

Yes. Remote drop-offs in Jeff Davis County commonly incur additional hauling or mileage surcharges because of long round trips, rough access roads, and fewer suppliers nearby. Hello Gravel shows any applicable delivery fees at checkout once you enter your address; call our team if your site is on a long ranch road or has tight access so we can include accurate surcharges in your quote.

A surface made only of fill-dirt will settle and break down faster than a properly constructed base, so expect routine maintenance (regrading, filling ruts) every 1-3 years under regular use. A driveway with a compacted fill subgrade plus a crushed-rock surface will last much longer (multiple years to decades) with periodic grading and spot replenishment after heavy rains or washouts.