Fill Dirt in Irving, TX

Fill dirt is native subsoil with low organic content used to raise or level ground, backfill behind foundations, and build grade under patios or driveways. In Irving and the Dallas–Fort Worth area it is commonly used to correct low spots and improve drainage, but it is not a planting medium — add topsoil before seeding or planting.

Choose clean, compactible fill with little organic matter (often called structural or compactible fill) so it bonds and supports loads on DFW's clay-heavy soils. Because Irving soils can be expansive, plan for proper compaction in lifts and consult a soils engineer for large grade changes or near foundations.

Hello Gravel connects you with local Irving and DFW suppliers that deliver fill dirt to residential addresses via contracted dump trucks. Delivery is subject to truck access, minimum orders (Hello Gravel minimum 3 tons), and supplier availability in your zip code, so check our site or call for a confirmed quote and delivery option.

Prices vary by source, but material alone in the Dallas–Fort Worth area commonly ranges roughly $12 to $25 per cubic yard, while delivered cost often falls between about $30 and $70 per cubic yard depending on distance, truck minimums, and access. For an exact price for your Irving address request a quote through Hello Gravel since rates and fees change by supplier and order size.

Use this quick formula: (length in feet) x (width in feet) x (depth in feet) divided by 27 to get cubic yards. For example, a 50 ft by 30 ft area raised 6 inches requires about 28 cubic yards; add 5–20% extra to account for compaction and settling depending on how dense you plan to compact it.

Fill dirt is usually cheaper than topsoil because it lacks organic matter and is intended for structural fill. For lawns and most landscaping in Irving use topsoil or a mix on the surface, with fill dirt used underneath to build grade — topsoil for the planting layer and fill dirt for bulk volume and structural needs.

Yes, larger grading projects or changes to drainage often require city permits in Irving, and HOAs may have rules about visible grading, retaining walls, or tree protection. Before major earthwork check the City of Irving building and engineering requirements and consult your HOA; Hello Gravel can help with delivery logistics but cannot advise on permit decisions.

Yes, local contractors commonly haul, spread, and compact fill using skid steers, bobcats, and plate rollers; many offer turnkey services. Labor and equipment rates vary, but expect typical operator plus equipment rates in the Irving/DFW area to range broadly (for example, $50–$150 per hour) or flat job rates — always get written quotes that list compaction specs if required.

Hello Gravel's standard delivery window is 2+ business days, and next-day delivery is often available for orders placed before noon CST for an additional fee. Same-week availability depends on supplier schedules and season; check your zip code on our site or call us to see current lead times for Irving deliveries.

Most fill dirt suppliers provide material samples on request, but on-site testing, compaction testing, and engineered fill specifications are typically services arranged through a geotechnical engineer or contractor rather than included with basic bulk dirt deliveries. If you need engineered fill or compaction certificates, request those services up front so the supplier and contractor can coordinate properly.

Demand peaks in spring and fall for landscaping and construction, which can drive lead times and prices higher; heavy rains in wet seasons can also delay deliveries. For lower risk and better scheduling, plan ahead, avoid stormy periods when possible, and check Hello Gravel for any seasonal promotions or supplier-specific timing.

Clear an appropriate drop zone and route for a dump truck, move vehicles and fragile items, and mark underground utilities by calling 811 before digging. Add delivery notes at checkout about access restrictions and request tailgate spreading if desired (drivers will assess feasibility on arrival), and confirm drop location with your supplier ahead of time.