Fill Dirt in Hunters Creek Village, TX

Fill-dirt is native or engineered soil used to raise grades, fill low spots, and level yards. In Hunters Creek Village it is commonly used to fix yard drainage, bring grades up to match foundations, or fill landscape beds, but it should not replace engineered backfill for structural foundations without a geotechnical recommendation.

Yes — in most cases fill-dirt costs less per cubic yard than gravel because it is a plain soil material rather than crushed stone. For Hunters Creek Village jobs where you only need to raise grade or fill holes, fill-dirt is typically the more economical choice, while gravel is better for driveways and surfaces that need drainage and load-bearing capacity.

Prices vary by supplier and truckload size, but expect typical local rates to fall roughly between $20 and $40 per cubic yard for standard fill-dirt. For an exact price for your address in Hunters Creek Village, check our online quote tool or contact our sales team — regional sourcing and delivery can change the final cost.

Tri-axle dump trucks that serve our area commonly hold about 10 to 14 cubic yards of loose fill-dirt, which usually translates to roughly 8 to 12 tons depending on moisture and soil density. If you need an exact tonnage for permits or compaction estimates, request a specific truck type when ordering and our team will confirm expected load weight.

Truck delivery cost depends on the number of cubic yards you order and local per-yard pricing; as an example, a 12-yard tri-axle load at $30/yd3 would run about $360 for material before fees. Hello Gravel shows exact pricing and delivery availability for your Hunters Creek Village zip code at checkout and can provide a firm quote including any delivery fees.

One cubic yard is 27 cubic feet — imagine a pile about 3 ft high by 3 ft wide by 3 ft deep. Spread out, 1 cubic yard covers about 108 sq ft at 3 inches deep or about 81 sq ft at 4 inches deep, which helps when planning grades and coverage on a Hunters Creek Village yard.

'Poor man’s concrete' usually refers to compacted fill (often mixed with gravel) used as a low-cost base for temporary pads. It is not a substitute for proper concrete or engineered base in Hunters Creek Village — clay soils can shift with moisture, so for driveways, permanent slabs, or load-bearing work you should use proper base materials and compaction per local codes.

Standard loose fill-dirt can be used for general grading and non-structural backfill, but it is not recommended as the final engineered backfill next to foundations or as a structural subbase for driveways. For foundation backfill or structural fills in the Hunters Creek Village area, follow your engineer’s specifications, which may call for compacted, tested structural fill or granular material instead of raw fill-dirt.

Standard delivery is typically 2 or more business days, while next-day delivery may be available for orders placed before noon CST for an extra fee. All deliveries to Hunters Creek Village are scheduled through our checkout calendar, and drivers may offer tailgate spreading at their discretion but this is not guaranteed.

Measure the area (length x width) in feet and decide how deep you need the fill in inches, then multiply area x depth (in feet) and divide by 27 to get cubic yards (length x width x depth/27). If you prefer, use Hello Gravel’s online material calculator or contact our team with project dimensions and we’ll provide a recommended quantity and ordering guidance.