Fill Dirt in Horseshoe Bay, TX

Delivered fill dirt prices in Horseshoe Bay vary with haul distance, screening, moisture content, and site access. Expect a rough range of about $12 to $40 per cubic yard (approximately $10 to $30 per ton) for common screened fill dirt, but exact pricing is best determined with a Hello Gravel quote for your zip code and delivery location.

Hello Gravel requires a minimum order of 3 tons. Standard deliveries take 2+ business days; next-day delivery is available for orders placed before noon CST for an additional fee, while same-day delivery is rarely available and depends on local supplier and truck schedules.

For a driveway base, fill dirt alone is not ideal — contractors typically use compactable crushed stone (3/4u0022 minus or a crusher-run base) or a mix of fill dirt with coarse rock beneath the surface to provide structure and drainage. For landscape fill or raising low spots, screened fill dirt (clean of large rock and organics) is appropriate and easier to grade and plant on.

Fill dirt is generally poor at improving drainage on its own because it compacts and reduces infiltration; for erosion control and waterfront work on Lake LBJ you should use engineered mixes with rock, geotextile, or graded stone and include proper slopes and drainage features. Always check local shoreline and floodplain regulations before placing fill near the lake, and consider mitigation like retaining walls or riprap to limit erosion.

Contractors typically remove vegetation, locate utilities, and bring subgrade to the correct elevation before placing fill. Fill is placed in 4u0022 to 6u0022 lifts, moisture conditioned, and compacted with a plate compactor or roller to typical target densities (contractor standard often 90% to 95% of standard proctor); for best results hire a local civil or earthwork contractor experienced with Hill Country soils.

Use this formula: square feet x depth (feet) / 27 = cubic yards. Multiply cubic yards by about 1.2 to estimate tons (approximate conversion for compacted fill dirt). Example: to raise 500 sq ft by 6u0022 (0.5 ft) you need 500 x 0.5 / 27 = 9.26 yd3, which is about 11.1 tons (9.26 x 1.2).

Fill dirt alone will settle and is not recommended as a finished driveway base; a properly constructed crushed-stone base over compacted subgrade can last many years with light maintenance. Expect to regrade, add material, or top up soft spots every 2 to 5 years depending on traffic, heavy rains, and drainage; addressing drainage up front reduces maintenance frequency.

You may need permits or HOA permission depending on project scope and location, especially for shoreline work, changes to lot grades, or large deliveries. Check with the City of Horseshoe Bay, the relevant county permitting office, and your HOA prior to ordering; Hello Gravel can help with delivery requirements but cannot advise on local permit approvals.

Fill dirt is best for raising grade or infilling; it does not provide a durable driving surface. Crushed limestone or decomposed granite creates a hard, well-draining surface and compacts into a stable driveway or ranch road, so use crushed stone or DG for the structural surface and fill dirt only to build grade where needed.

Yes; screened fill dirt is cleaned of large rock and organic debris and is easier to finish, plant, and compact for landscaping. Unprocessed or raw fill is cheaper and fine for utility backfill or large earthwork where fines and rocks are acceptable; when ordering through Hello Gravel, request screened material in Order Notes and ask for supplier photos if appearance matters.

Note driveway width, overhead wires, gates, and turnaround room in your order notes and call Hello Gravel if access is tight. Request tailgate spreading at checkout if desired (drivers may spread at their discretion), and provide clear drop location and any HOA or permit details to avoid delays; if you need spreading or compacting, plan to hire a local contractor rather than relying on the driver.