Fill Dirt in Horizon City, TX

Delivered fill dirt prices in the Horizon City area typically range from about $8 to $20 per ton, or roughly $10 to $30 per cubic yard, depending on moisture content and local supply. These are estimates only; final price depends on delivery distance, minimum order (Hello Gravel minimum is 3 tons), and seasonal demand, so get a local quote for an exact number.

For foundation backfill use low-organic, well-graded fill with a mix of sand and small gravel to promote drainage and steady compaction; avoid high-organic or high-clay soils that shrink or swell. For driveways in West Texas, fill dirt alone is not recommended—use a compactable base like crusher run or caliche over the fill to create a firm, well-draining surface.

Contractor pricing varies, but many charge by the cubic yard or by the hour; typical rates for spreading and compaction can range from about $2 to $8 per cubic yard for straightforward residential jobs, or $50 to $150 per hour for labor and equipment on small sites. Costs rise for tight access, site preparation, or when heavier compaction specs (engineer-specified percent compaction) are required, so get written estimates from local contractors.

Common issues are settling and erosion from flash rains; arid soils can be loose if not compacted and may wash out on slopes. Prevent problems by placing fill in 4-8 inch lifts with mechanical compaction, controlling runoff with swales or rock-lined channels, using geotextile where needed, and avoiding organic topsoil in structural fills.

A quick rule: 1 cubic yard is about 1.1 to 1.4 tons for fill dirt (we commonly use 1.2 tons/yd3 as an estimate). Examples: to raise a 1,000 sq ft yard by 3 inches you need ~9.3 cubic yards (~11 tons); to lay a 6 inch driveway base under a 12 ft x 30 ft drive you need ~6.7 cubic yards (~8 tons). Use our material calculator or contact Hello Gravel with dimensions for a precise quantity.

Fill dirt is generally the least expensive material and is intended to bulk-fill and raise grade, but it lacks the stability and drainage properties of crusher run or crushed limestone. Crusher run and crushed aggregates are better for driveways and structural bases because they compact well and shed water, and topsoil is best reserved for planting surfaces and is usually the most expensive per yard. Choose material by application: fill dirt for mass grading, crusher run for bases, topsoil for gardens.

Hello Gravel works with local El Paso County suppliers and haulers that service Horizon City; delivery radius commonly falls between 20 and 50 miles from the supplier, but exact availability depends on local inventory and the contractor network. Enter your zip code on Hello Gravel to view available suppliers, exact delivery fees, and scheduled dates for your address.

Possibly. Small grading and residential landscaping often do not need permits, but any work that changes lot drainage, raises grade significantly, or alters driveway location may require a permit from the City of Horizon City or El Paso County. HOAs commonly have rules about driveway materials, exposed fill, and front-yard appearance, so check with your HOA and local building office before ordering.

Because Hello Gravel sources locally, fill dirt appearance and texture will vary with local geology—Horizon City soils often contain caliche, sand, and some clay, so coloration and stone content can vary between loads. You can add color or material notes at checkout and contact customer service if you need a closer match, but expect natural variation.

Even properly compacted fills can experience small additional settlement over months; loosely placed or poorly compacted fill can settle noticeably after heavy rains. Plan for final grade tolerance—many homeowners top off and re-compact a bit after the first rainy season or after heavy traffic—and consider engineered compaction if settlement must be kept to a minimum.

Clear a safe dump path and mark utilities or sprinkler heads before delivery, and include access notes at checkout so the driver knows gate codes or where to place the load. For tight sites, request tailgate spreading at checkout (driver discretion) or hire a local contractor with a skid steer to spread and compact material after delivery.