Fill Dirt in Hill County, TX

Fill-dirt is subsoil with low organic content used to raise or level ground, not topsoil for planting. In Hill County it is commonly used to build pads, raise driveways, backfill foundations, and correct grades before placing gravel or sod. Because local material reflects Hill County geology, color and clay content can vary by supplier. If you need planting soil or drainage material, ask for a specific product rather than standard fill-dirt.

Delivered prices for fill-dirt in Hill County typically range from about $10 to $20 per ton, depending on local supplier rates, distance, and access to the drop site. Heavy-haul charges, rural delivery fees, and seasonal demand can push costs higher. Use our zip-code quote tool or contact our team for a firm price for your address.

Assuming a standard 2-car driveway about 20 ft wide by 20 ft long, raising it 4 inches requires roughly 5 cubic yards (about 6.5 to 7 tons) of fill-dirt. Allow 10% to 20% extra for compaction and grading losses, so order about 8 tons to be safe. If your driveway is longer or wider, recalculate using area x depth to get the correct quantity.

For Hill County's clay-prone soils, choose clean, low-organic fill-dirt with minimal fines and good compaction properties. Avoid high-organic topsoil or silty mixes that retain water; instead use well-draining fill or request a blended subbase from suppliers. For driveways and grade work, pairing compacted fill-dirt with a granular layer (crushed stone) on top improves drainage and stability.

Loose fill-dirt by itself can erode on slopes during heavy rains common in Central Texas. Proper installation—compaction in lifts, slope stabilization (sod, erosion blankets, rip rap, or retaining walls), and surface cover—greatly reduces washout risk. For steep or highly erosive slopes, ask a contractor or engineer about erosion control measures before delivery.

Labor and equipment costs vary, but typical contractor rates for grading and compaction in Hill County range from about $50 to $150 per hour depending on machine and operator. For modest driveway raises or small pads expect total installation costs from a few hundred dollars up to $1,500-$3,000 for larger jobs that require excavation, compaction, and finish grading. Get written estimates from local contractors and confirm whether compaction testing is included if your project needs engineered specifications.

Permitting requirements vary by project and location; routine deliveries of fill-dirt often do not require a permit, but changes that affect drainage, floodplains, wetlands, septic systems, or county road access may require permits or approvals. For septic mounds, mobile home pads, or large earthwork, check with Hill County permitting and the local health district before starting. When in doubt, contact county offices or ask Hello Gravel for guidance before ordering large volumes.

Hello Gravel connects you with local Hill County suppliers that deliver to rural addresses; supplier availability and minimums vary by location. Our platform minimum order is 3 tons, but rural deliveries often have higher minimums or added mileage fees—commonly 5 to 10 tons for long-drive or restricted-access sites. Enter your zip code on our site or contact our team to see which local suppliers can deliver to your address and their specific minimums.

For farm roads and heavy-use equipment paths in Hill County's clay soils, crushed stone or crushed limestone is generally recommended as the wearing surface because it sheds water and resists rutting. Fill-dirt can be used as a subgrade to build up low spots, but it should be compacted and capped with a granular base and a stone surface for durable performance. Contractors typically use a compacted fill subgrade plus 4 to 6 inches of crushed stone for routine farm access roads.

Most new fill-dirt settles the most in the first 6 to 12 months; you may need minor top-ups or regrade after the first rainy season. With proper compaction during installation and a protective surface (stone, turf, or vegetation), intervals between maintenance lengthen—often several years for low-traffic areas. High-traffic or poorly drained sites will need attention more often.

Fill-dirt can be part of septic mounds or mobile home pads, but these applications typically require engineered fill and compaction to specific standards. For safety and code compliance, Hill County and the local health authority usually require plans or approvals; engineered specs often call for compacted lifts (commonly 6 to 8 inches) and well-draining material or a granular cap. Always consult the county health department and a licensed engineer before using fill-dirt for septic or structural pads.