Fill Dirt in Hemphill, TX

Fill dirt is plain earth used to raise or level ground, not decorative stone. In Hemphill you would use it to build up low spots, bring a yard up to grade for drainage, or prepare a building pad; it is not a finished surface for driveways or walkways because it can be soft and dusty without a granular cap.

Prices vary with supplier, distance, and local availability, but rural Sabine County deliveries for fill dirt commonly fall in a modest range. Expect to see estimates from several dollars to a few dozen dollars per ton; log into Hello Gravel or check your zip code for up-to-date local pricing and any delivery fees.

Most deliveries to Hemphill arrive on tri-axle dump trucks; a typical tri-axle carries roughly 10–16 cubic yards of loose fill (about 12–18 tons depending on moisture and material density). Suppliers may also offer smaller loads, partial loads, or multiple truck options; Hello Gravel’s minimum order is 3 tons.

For compaction and stability in the Hemphill area, sandy or sandy-silty fill mixes compact better and drain faster than clay-rich soils. If local native soils are clayey, consider bringing in select fill (sandy material) or adding drainage layers such as coarse sand or small gravel under key areas to reduce water retention and long-term settling.

Hello Gravel works with trusted suppliers and haulers that serve Hemphill and surrounding parts of Sabine County. Enter your zip code on our site or contact our team for a list of local suppliers, availability, and specific service areas for your address.

Permit requirements depend on the amount of material, location relative to property lines, floodplains, and septic systems. Small grading jobs often need no permit, but larger fills or work near drainage easements or floodplain areas may require Sabine County or city approval, so check with Hemphill city hall or Sabine County permitting before starting.

Hemphill’s weather can bring heavy rains that slow deliveries, make compaction difficult, and increase erosion risk on fresh fills. Avoid major fills during prolonged wet periods, protect slopes with straw or seed if rainfall is expected, and schedule deliveries for drier seasons when compaction equipment can work effectively.

Spreading and compacting costs vary with access, job size, and contractor rates; many local crews charge by the hour or by the cubic yard. Typical ballpark ranges in rural Texas are several dollars to around twenty dollars per cubic yard depending on spread thickness, number of compaction passes, and site constraints—get local bids for exact pricing.

To raise 1,000 sq ft by 3 inches requires about 9.3 cubic yards of fill, which typically equals roughly 11–14 tons depending on material density. For 6 inches you would double that to about 18.5 cubic yards or roughly 22–28 tons; always order a small extra allowance for compaction and settlement.

Fill dirt alone is not recommended as a finished driveway surface because it compacts poorly for traffic and can rut or wash out. For driveways in Hemphill, use fill dirt only to raise grade if needed, then build a compacted granular base like road base or crusher run topped with crushed stone for durability, drainage, and lower maintenance.