Fill Dirt in Gilmer, TX

Delivered fill dirt prices in Gilmer typically vary depending on supplier, haul distance, moisture content, and truck fees. Expect a rough range of about $8 to $25 per ton ($10 to $35 per cubic yard) for ordinary fill dirt delivered; larger orders and local suppliers may be at the lower end. Hello Gravel shows exact pricing at checkout for your zip code and offers transparent fees, with a 3-ton minimum and standard 2+ business day delivery.

For raise and basic backfill in West Texas, choose a clean, well-draining fill dirt with low organic content and some granular material to reduce shrink-swell. For driveways you should prefer engineered fill or mix in crushed stone/road base rather than relying on raw fill dirt alone. Always mention project details in your Hello Gravel order notes so we can match you with a supplier that reflects local geology.

To raise 1,000 sq ft by 6 inches you need about 18.5 cubic yards, and to raise it by 1 foot you need about 37 cubic yards. Using typical local densities, that equals roughly 22 to 28 tons for 6 inches and about 44 to 56 tons for 1 foot, depending on moisture and compaction. Use Hello Gravel's material calculator for a precise estimate based on the supplier in your area.

Fill dirt can be used to regrade slopes, but plain fill dirt—especially clay-rich types—often compacts and sheds water, which can increase runoff and erosion. For drainage and erosion control in Gilmer's West Texas conditions, combine fill dirt grading with drainage rock, swales, geotextile fabric, or vegetation; consider engineered fill and professional grading for steep slopes. If in doubt, consult a local contractor or Hello Gravel's team to match the right material to your slope.

Proper compaction in 6-inch lifts with a plate compactor or roller is essential; moisture conditioning before compaction often improves results in clay-heavy soils. Even when compacted, fill dirt alone is not a long-term driveway surface—expect settling and rutting unless you install a structured base like road base or crusher-run and a wearing surface. For driveways in hot, clay-prone West Texas soils, use fill dirt only for rough grading and follow with compacted base material for longevity.

Fill dirt is primarily for raising grade and backfill; it does not compact into a stable wearing surface. Crusher-run and road base are crushed stone mixes designed to interlock and compact, making them far better choices for driveway bases and pads where load-bearing and drainage matter. In Gilmer, use fill dirt to set grade, then finish with road base or crusher-run for driveways and concrete or paver pads.

Hello Gravel works with local suppliers and haulers that serve the Gilmer area; availability and exact suppliers vary by zip code. Typical minimums start at our 3-ton minimum, with many suppliers offering free delivery locally on larger loads, while remote or tight-access jobs may have additional fees. Check availability and get a quote at checkout or contact our sales team for local supplier options and any special site instructions.

Some neighborhoods and county roads near Gilmer may restrict heavy trucks or require permits for overweight/oversize loads, and there can be local rules for street parking or blocking driveways during delivery. Tell Hello Gravel about narrow drives, low-hanging wires, or weight-sensitive streets before delivery so we can coordinate with the hauler. For very large jobs, we recommend checking with your city or county public works office to confirm permit needs.

Use fill dirt for bulk grading and then apply 4 to 6 inches of quality topsoil over the final grade for lawns and planting. Avoid burying seed or sod directly in raw fill dirt because it lacks organic matter; blend or top-dress with screened topsoil and amend with compost where needed. Lightly firm the fill, then finish with topsoil, seed, and mulch; Hello Gravel can deliver both fill dirt and screened topsoil if you need both materials.

Contractors typically receive better per-ton pricing on larger, repeat, or scheduled deliveries, with discounts often kicking in for orders of several dozen tons or more. Pricing also depends on site access, timing, and whether the hauler can make multiple loads on a route. For contractor rates and volume discounts in Gilmer, contact Hello Gravel's sales team with project details for a tailored quote.