Fill Dirt in Geronimo, TX

Delivered fill dirt prices in small West Texas towns like Geronimo typically vary based on haul distance and availability; expect roughly $10 to $30 per ton (about $12 to $36 per cubic yard) as a general range. Exact price depends on the supplier, truck type, minimum order (Hello Gravel minimum is 3 tons), and whether you need spreading or special access. Use Hello Gravel's checkout or request a quote for an accurate delivered price to your zip code.

Bulk prices for fill dirt around Geronimo usually fall into a wide range because local supply and hauling distance drive cost; small local jobs commonly land near the low end while long hauls or scarce supply push prices higher. Seasonal demand and moisture content can also affect price. The fastest way to get a firm rate is to check availability and pricing through Hello Gravel for your specific delivery address.

Suppliers vary by region and supplier networks, and Hello Gravel connects you with trusted local suppliers and haulers that serve your area. Because Geronimo is a small community, deliveries usually come from nearby pits or regional suppliers; availability depends on your zip code and current stock. Contact Hello Gravel or enter your address at checkout to see the exact suppliers that can deliver to Geronimo.

Fill dirt can work well as bulk fill in hot, dry West Texas climates, but it needs proper placement and compaction to limit settling and erosion. Dry, loose fill can shrink and settle; compacting in thin lifts and keeping moisture control during compaction reduces future settlement. For erosion-prone slopes or areas with occasional heavy storms, use proper grading, temporary erosion control (straw, wattles), and a more erosion-resistant cover or surface material.

For structural areas like a garage slab or driveway base, aim for high compaction—commonly 90-95% of maximum dry density (per local standards)—and place fill in 6-8 inch lifts, compacting each lift with a plate compactor or roller. For non-structural yard fill, slightly lower compaction may be acceptable, but compacting in lifts is still important to reduce future settlement. Check local building codes for slab or foundation projects and consider hiring a compaction contractor or rental equipment for best results.

Measure the area (length x width) and the desired depth in feet to get cubic feet, divide by 27 to convert to cubic yards. Multiply cubic yards by about 1.2 to 1.4 to estimate tons of fill dirt (1.3 is a good working factor for many fills). Example: a 20 ft x 10 ft area at 6 inches deep = 100 cubic feet = 3.7 cubic yards ≈ 4.8 tons. Use Hello Gravel's material calculator or contact our team for help with tricky slopes or large fills.

Use fill dirt for raising grade, backfill, and non-driving subgrade work—it's not a good final surface for driveways because it does not resist rutting or erosion. For driveways, choose crusher run, road base, or crushed limestone as a compactable, stable wearing surface that will stand up to traffic and runoff. For erosion control, use rock armoring, crushed stone, or vegetative measures rather than plain fill dirt on exposed slopes.

Permitting depends on the scope of the work and local jurisdiction; Geronimo is a small community so major grading, changes to drainage, work in road right-of-way, or fills near waterways may require county permits or approvals. Always check with your county permitting office (and any homeowners association if applicable) before large-scale fills. If you are unsure, Hello Gravel's team can point you to local county contacts and recommend checking with the building or development office.

Expect some settling in the first year that may require adding more material and light regrading, especially after heavy rains. Fill dirt surfaces will remain dusty and prone to erosion unless capped with topsoil and vegetation or covered with gravel/road base for traffic areas. Plan for periodic checks after storms and maintain vegetation or erosion controls on slopes to reduce washouts.

Delivery of fill dirt is commonly offered by haulers, but spreading and compaction services vary by supplier; many drivers can perform limited tailgate spreading upon request but it is done at the driver's discretion. Compaction is generally a separate service handled by local contractors or equipment rentals, so plan to book a compaction contractor if you need professional-grade compaction. Request spreading or special services in your Hello Gravel order notes and confirm before delivery to set expectations.