Fill Dirt in Firethorne, TX

Typical delivered pricing for basic fill-dirt in the Firethorne area ranges from about $12 to $30 per ton, depending on volume, supplier, and site access. Minimum orders often start at 3 tons and additional fees can apply for next-day delivery, tight access, or special placement. For an exact delivered price to your address, check your zip code on Hello Gravel or request a quote.

Hello Gravel connects you with regional suppliers serving the Texas Region; standard delivery is 2+ business days and next-day delivery is available for orders placed before noon CST for an extra fee. Lead times can be longer after heavy rain, during peak season, or for large orders, so schedule early and include delivery notes about access and placement. We work with local dump truck fleets (typically tri-axle) and will confirm timing after you place an order.

Plain fill-dirt is usually fine-grained (silt/clay) and compacts well for raising grade, but it is not ideal as the final driving surface. For a compacted driveway base in Texas clay, use select/engineered fill or a mix of compactable fill-dirt in 4-6" lifts finished with 4-6" of crushed stone (3/4" minus or crusher-run) for drainage and load-bearing. If you only have access to fill-dirt, compact it in thin lifts and add a proper stone base before paving to reduce settling and rutting.

Use these approximate amounts for typical fill-dirt (assumes about 1.2 tons per cubic yard): 1" depth = 3.1 yd3 (3.7 tons). 2" = 6.2 yd3 (7.4 tons). 4" = 12.3 yd3 (14.8 tons). 6" = 18.5 yd3 (22.2 tons). 12" (1 foot) = 37.0 yd3 (44.4 tons). Density varies by moisture and composition, so buy 5-10% extra for compaction and settling.

Fill-dirt with a higher clay content common in the region can shrink in dry, hot weather and swell or become soft during prolonged rains, which can cause settling or poor drainage. To perform well, fill-dirt should be placed in controlled lifts and compacted; add drainage material (coarse stone) where surface runoff or saturation is expected. For critical areas like foundations or driveways, use engineered fill or a stone base to avoid moisture-related movement.

Possibly. Firethorne is in Fort Bend County and may have local grading, stormwater, or right-of-way rules for significant earthwork; your HOA may also restrict visible grading, stockpiles, or truck access. Before ordering large loads, check with the Firethorne HOA and Fort Bend County permitting office to confirm any requirements. If permits are needed, plan deliveries and staging to comply with local rules and avoid delays.

Tailgate spreading may be performed at the driver's discretion and can be requested at checkout, but it is not guaranteed and depends on site safety and truck access. Deliveries are typically by tri-axle dump truck and placement depends on access, overhead wires, and ground conditions; drivers will choose the safest spot. Add clear delivery notes, photos, and preferred placement in your order to help the driver and reduce repositioning fees.

Place fill-dirt in 4-6" lifts and compact each lift thoroughly using a plate compactor or roller to reduce future settling. Create positive slopes away from foundations, install drainage swales or French drains where water pools, and cap fill areas with compactable gravel where traffic or structures are planned. For critical or saturated areas, consider engineered fill or professional geotechnical guidance rather than plain fill-dirt.