Fill Dirt in Edgewood, TX

Delivery cost varies by distance, truck type, and access, but most residential fill dirt deliveries in the Edgewood area fall into a modest local-haul range. Hello Gravel offers standard delivery with a 2+ business day window and charges depend on supplier and hauler rates; next-day delivery is available for an extra fee if ordered before noon CST. For an accurate figure, check your zip code and cart on Hello Gravel to see the delivered price for your address.

Edgewood homeowners usually source fill dirt from local gravel yards and regional producers in Van Zandt County and nearby West Texas towns. Hello Gravel connects you with vetted local suppliers and shows available options and pricing when you enter your zip code, making it easy to compare materials and delivery. If you prefer to call, our sales team can recommend suppliers based on your project and delivery needs.

For driveways, a well-graded fill dirt with some sandy content or aggregate mix provides better compaction and drainage than pure clay. For building pads, engineered fill or compacted structural fill is preferred; if using local fill dirt, it should be placed in controlled lifts and compacted to specification. Because West Texas soils can include clay that shrinks and swells, consult a contractor or engineer for structural pads to confirm suitability.

Use this rule: 1 inch of cover over 1,000 square feet equals about 3.09 cubic yards. In general, 1 cubic yard of loose fill dirt typically weighs about 1.1 to 1.4 tons, so 1 inch over 1,000 square feet is roughly 3.4 to 4.3 tons. For a 12-by-40-foot driveway (480 sq ft), each inch equals about 1.5 cubic yards, and for a small yard patch adjust proportionally and round up for settlement and compaction.

Prices change with season and local supply, so ranges are only approximate: in much of East and West Texas, loose fill dirt often lists at a relatively low per-yard or per-ton rate compared with engineered materials. Expect variability due to hauling distance and truck minimums; the best way to get current pricing is to enter your zip code on Hello Gravel or request a quote. Hello Gravel displays delivered price and any minimum order or delivery fee specific to your address.

Plain fill dirt is not ideal for improving drainage because it tends to compact and, depending on clay content, can hold water rather than shed it. For erosion control on slopes or in drainage paths, combine proper grading, geotextile fabric, and materials like riprap, crushed rock, or gravel; vegetative cover or mulch also helps. For short-term grading, fill dirt is fine, but for long-term drainage solutions use materials designed for permeability and stabilization.

Proper compaction is critical: place fill in uniform lifts of about 4 to 6 inches and compact each layer to achieve the specified density, which contractors often target around 90-95% of standard Proctor for structural work. For small patches a petrol plate compactor or jumping jack is typical; for larger areas or deeper fills, a vibratory roller or sheepsfoot roller and excavator/bobcat for placement are used. If you are unsure of required compaction levels for a foundation or driveway base, get guidance from a local engineer or contractor familiar with West Texas soils.

Fill dirt is a cost-effective option for non-structural grade adjustments and general site fill, but it is less predictable than engineered fill when used for foundation backfill. Engineered fills are specified, tested, and often use better-graded materials or crushed stone to achieve reliable compaction and drainage, which reduces risk of settlement in West Texas soils. For any foundation or load-bearing application, consider engineered fill or crushed rock and follow a geotechnical recommendation.

Hello Gravel’s minimum order is 3 tons, and deliveries are made by contracted dump trucks (typically tri-axle), so trucks need safe, reasonably sized access to offload. Common constraints in rural Edgewood include long driveways, low-hanging wires, or tight turns; note these in your order notes and check with our team so haulers can plan the best drop-off spot. Tailgate spreading may be available at the driver's discretion but is not guaranteed, so plan for on-site distribution if needed.

After placement, fill dirt commonly settles over time, especially after heavy rain or irrigation, so expect to add material or regrade low spots in the first season. In hot, dry conditions vegetation can take longer to establish; use topsoil and seed or mulch where you intend to grow grass to help prevent erosion. For driveways and pads, maintain surface grading and consider a top layer of gravel or crushed stone to reduce dust and erosion.

Start by measuring the area and using the cubic yard conversion guidelines to estimate quantities, then enter your zip code on Hello Gravel to see local options and delivered pricing. Select your delivery date (standard 2+ business days or next-day before noon CST for an extra fee), note any access issues or spreading requests at checkout, and contact our team if you need help with quantity calculations or supplier recommendations. If your project involves structural fill or foundations, get a contractor or engineer involved before ordering.