Fill Dirt in Edgebrook Area, TX

Delivered fill-dirt prices in the Edgebrook Area typically fall in the range of about $12 to $30 per ton. Final cost depends on source, local trucking distance, whether material is screened, and any access or surcharge fees; use Hello Gravel to get a real-time quote for your zip code.

Local suppliers usually offer screened fill-dirt (fines removed) and basic fill (unscreened, economical). Delivery policies vary: Hello Gravel ships by tri-axle dump truck with a 3-ton minimum, standard 2+ business day delivery, and next-day options before noon CST; some suppliers add fees for tight access, long hauling, or off-hour deliveries.

Multiply your area in square feet by the desired depth in feet, then divide by 27 to get cubic yards (yd3 = ft2 * ft / 27). Convert cubic yards to tons using a fill-dirt factor of about 1.2 to 1.4 tons per cubic yard for local Texas material (tons = yd3 * 1.2-1.4); for example, 1,000 ft2 raised 3 inches (0.25 ft) = 9.3 yd3, or roughly 11 to 13 tons.

For driveways, choose fill that compacts well: a screened fill-dirt mixed with a portion of crushed stone or crusher-run works best for stability and drainage. For foundation backfill, use engineered or tested fill (contractor-grade, compacted in lifts) rather than loose topsoil; local clay conditions in Edgebrook Area mean engineered fill or well-draining mixes are often recommended for structural work.

Initial settling can occur quickly after placement, especially after heavy rain, but deeper consolidation in Texas clay soils can take weeks to months. For non-structural landscaping you can often proceed once material is compacted and stable; for driveways allow a few weeks and for structures consult a geotechnical engineer — engineered fill and compaction records reduce settlement risk.

Often you do not need a permit for small-grade changes, but local rules vary: Edgebrook Area and county ordinances may restrict fill in drainage easements, require erosion control, or limit changes that impact neighboring properties. Check your city or county building department and any HOA before ordering large quantities to avoid stop-work orders or fines.

Most Hello Gravel deliveries use tri-axle dump trucks that need adequate turn radius, 12-14 foot vertical clearance, and room to safely dump from the street. Customers may see surcharges for narrow driveways, long walk-ins, steep grades, or required permits; provide clear access notes at checkout and photos when requested to avoid surprises.

For simple grade raising and non-structural fill, fill-dirt is economical but may not provide long-term stability on its own. Crushed limestone or crusher-run is usually better for driveways because it compacts firmly and drains well; engineered fill (compacted, tested material) is the right choice for structural pads or when an engineer specifies subgrade requirements.

Rates vary, but expect local contractors to charge roughly $75 to $150 per hour for equipment and operator, or a per-job rate that can be $300 to $1,200 depending on job size and complexity. Compaction and spreading costs depend on access, required machinery (skid steer, excavator, roller), and whether the work requires permits; get multiple local quotes and ask for line-item pricing.

Reduce erosion by compacting fill in 4- to 6-inch lifts, shaping slopes to shed water away from structures, and installing temporary silt fences or straw wattles during storms. Use geotextile where appropriate, establish vegetation or temporary mulch quickly, and provide swales or rock check dams at drainage points to control concentrated flows.