Fill Dirt in Cumings, TX

Prices for bulk fill-dirt in the Texas Region around Cumings typically range from about $10 to $30 per ton (roughly $12 to $36 per cubic yard). Exact pricing depends on local supply, haul distance, moisture content, and whether the material is screened or contains rock; Hello Gravel’s minimum order is 3 tons and we’ll show local pricing when you enter your zip code.

Hello Gravel connects you with trusted local suppliers and contracted haulers that serve the Cumings area, so the best way to find available vendors is to enter your zip code on our site or call our team. In rural areas near Cumings some suppliers may haul from nearby towns and may ask for a truck minimum or longer lead time, which we’ll show during checkout.

Hot, dry spells in Texas can make loose fill-dirt dusty and harder to compact without adding moisture, while heavy rains can saturate fine soils and reduce stability until they dry and are re-compacted. Local soils often contain clays that expand when wet and shrink when dry, so compacting in thin lifts with mechanical equipment and controlling moisture during placement is important for long-term performance.

Fill-dirt is commonly used for general grading and raising low spots, and it can work for driveways if covered with an appropriate base like crusher run or gravel. For septic backfill or any structural work (foundations, vehicle load-bearing areas) check county building and health department requirements first because some jurisdictions require engineered or granular backfill and compaction testing; when in doubt use engineered fill and a compaction plan.

Topsoil is best when you need planting or lawn establishment; crusher run (or road base) is a good choice under driveways for strength and compaction; drain rock or washed stone is used where drainage is needed such as French drains or septic drain fields. Choose topsoil for landscaping, crusher run for vehicle load-bearing areas in and around Cumings, and drain rock where water movement is the priority.

Use this quick rule: tons per square foot ≈ depth_inches / 324 × 1.3 (1.3 is a typical tons-per-cubic-yard estimate). That gives about 0.004 tons/sq ft for 1", 0.012 tons/sq ft for 3", and 0.024 tons/sq ft for 6"; for example a 1,000 sq ft area needs roughly 4 tons at 1", 12 tons at 3", and 24 tons at 6". These are estimates only—actual needs vary with compaction and soil type, so order a little extra or contact our team for a site-specific calculation.

Hello Gravel’s standard delivery lead time is 2+ business days, with a next-day option for orders placed before noon CST for an extra fee. Our platform minimum order is 3 tons, but rural deliveries around Cumings may have truck-size minimums, longer drive fees, or longer lead times if material must be brought from outside the immediate area; details will appear during checkout.

Drivers may offer tailgate spreading at their discretion, and you can request it at checkout, but there are no guarantees since spreading depends on safety, access, and truck load. If you need precise grading or compaction, plan to hire equipment or a contractor—tailgate spreading is best for rough placement only.

Clear a straight access path for a tri-axle dump truck, mark the exact drop location with flags or stakes, and note overhead wires, slopes, or soft ground that could affect truck access. Also call 811 to locate underground utilities, check for any required permits with your county, and let the driver know if you need the load placed a specific way; these steps speed delivery and reduce the risk of complications.