Fill Dirt in Caldwell, TX

Prices fluctuate with local supply, delivery distance, and seasonal demand, but fill dirt in the West Texas/Caldwell area commonly falls in an approximate range of $10 to $25 per ton (roughly $12.50 to $31 per cubic yard using a 1.25 tons/yd3 estimate). Hello Gravel has a minimum order of 3 tons and delivery fees can change the final price, so the fastest way to get an accurate, current cost is to enter your zip code and request a quote through our site.

Many local suppliers in the region offer both screened (finer, fewer rocks) and unscreened (cheaper, coarser) fill dirt, but availability depends on local quarries and season. Hello Gravel partners show product details and minimums online; note our platform enforces a 3-ton minimum order and delivery fees vary by supplier and distance—check the product listing or request a delivery quote to see screening status and any added fees.

Fill dirt generally compacts well when placed and mechanically compacted, but on clay-rich West Texas soils it can hold water and drain slowly, increasing settlement risk. In limestone or mixed soils, pockets of rock can affect compaction uniformity; for projects where drainage matters, consider mixing or placing a drainage layer (sand or crushed rock) and use mechanical compaction to reduce future settling.

For residential driveways, contractors usually do not recommend fill dirt as the finished wearing surface; instead they place 4 to 8 inches of engineered base (crusher run or class 2) over properly compacted fill. Building pads typically require 8 to 24 inches of compacted structural fill placed in 4 to 6 inch lifts and compacted to 90-95% of standard Proctor for less critical uses, or 95%+ for structural foundations; local code or an engineer may require different specs, so get a site-specific recommendation for building pads.

Use area x depth to get cubic feet, divide by 27 to get cubic yards, then multiply by about 1.25 tons per cubic yard for a typical loose fill dirt estimate. Examples: raising 1,000 sq ft by 6 inches = 1,000 x 0.5 ft = 500 cu ft = 18.5 cu yd ≈ 23 tons; raising 500 sq ft by 6 inches ≈ 12.3 cu yd ≈ 15 tons; raising 1,500 sq ft by 4 inches ≈ 18.5 cu yd ≈ 23 tons. These are estimates that assume loose material; ask us for a quote or use the Hello Gravel calculator for a site-specific number.

As a subgrade or for general lot grading, properly compacted fill dirt can be stable for many years, but surface settlement and erosion can appear over time, especially after heavy rains common in spring. For driveways, fill dirt alone is not a durable wearing surface; plan on a proper base and periodic top-up or regrading every few years, and consider erosion controls and vegetation to reduce maintenance in hot, dry summers and stormy seasons.

Fill dirt is usually the least expensive option but it contains more fines and organic material and drains poorly, so it is less durable for drive surfaces. Crusher run, road base, and class 2 base cost more upfront but provide much better compaction, load-bearing capacity, and drainage for driveways; for a long-lasting driveway in Caldwell, use fill dirt only as subgrade and a structural base material on top for the wearing surface.

Yes, local permitting and HOA rules can affect grading, significant fills, and anything that changes drainage on a lot. Check with the City of Caldwell building or planning department and your county for grading permits, floodplain restrictions, or stormwater rules, and review HOA covenants for surfacing or finish material restrictions before placing large quantities of fill dirt.

Some suppliers and local contractors offer spreading and compaction services, but Hello Gravel deliveries are by contracted haulers and tailgate spreading is available only at the driver's discretion and not guaranteed. Typical contractor labor rates in the region vary widely; expect roughly $50 to $100 per hour for general labor, machine-assisted spreading and compaction priced either hourly or by job, and small compactor rentals in the $100 to $250 per day range—get written estimates from local contractors for firm pricing.

Yes. Heavy rain events in spring can saturate soils and make placement and compaction difficult, while extreme summer heat dries material and increases dust control needs—both conditions can complicate proper compaction. Aim for mild, drier periods in spring or fall when possible, and schedule deliveries around weather forecasts to improve placement and compaction results.