Fill Dirt in Arnett Benson, TX

Delivered prices vary by supplier, moisture content, and truck access. In the Texas Region around Arnett Benson, expect a typical range of about $10 to $30 per ton (roughly $13 to $40 per cubic yard) depending on local availability and whether delivery or spreading is requested; check our site with your zip code for an exact delivered price.

Hello Gravel connects you with nearby regional suppliers and landscape yards that serve Arnett Benson; availability depends on your exact zip code. If you need a supplier list, enter your address on our site or contact our team and we will match you with trusted local quarries and haulers that carry non-organic construction fill.

Fill-dirt is a mostly mineral soil with minimal organic matter used for raising grade or filling low areas; it is not topsoil. In the Texas Region it is commonly supplied as a 0"-3/4" or 0"-1" minus product (mixed fines and small rock) for good compaction; specifications vary by supplier so ask for a gradation or material description before ordering.

For structural building pads, local builders and engineers typically specify compaction to about 90% to 95% of maximum dry density (Standard Proctor); this reduces future settlement. Driveway subgrades are often compacted to similar levels for a stable base, though a granular road base or crushed limestone layer is usually placed on top for surface performance.

Use this formula: cubic yards = (square feet x depth in inches) / 324. For example, per 1,000 sq ft: 2" = 6.17 cu yd, 3" = 9.26 cu yd, 6" = 18.52 cu yd. Convert to tons using a local density estimate of about 1.1 to 1.4 tons per cubic yard for fill-dirt (use 1.2 tons/cu yd as a practical average), so 6.17 cu yd x 1.2 = about 7.4 tons for 2" over 1,000 sq ft.

Texas clay soils expand and shrink with moisture, which can cause more settlement or movement if fill is not compacted or if drainage is poor. Hot summers and occasional heavy rains in the region increase the importance of good compaction, positive grading, and surface drainage; consider adding a granular layer and proper runoff paths to reduce erosion and long-term settling.

Fill-dirt is best for raising grade, filling low spots, and structural backfill, not as a wearing surface. For driveways, a layered approach is better: compacted fill-dirt to bring grades to level, then a well-graded road base or crushed limestone as the finished driving surface. Topsoil is for planting and should not be used under driveways or for structural backfill.

Permit needs vary by county and municipality in the Texas Region; some projects that change drainage, affect floodplains, or alter septic fields may require permits or engineered plans. Before large fills or building pads, check with the Arnett Benson city or county building and planning office and with your septic permitting authority; Hello Gravel can help you find local contact information.

Both options are common in and around Arnett Benson. Many local excavation and landscaping contractors will provide material and install it for you, especially for larger jobs or structural fills; homeowners doing small projects often buy fill-dirt delivered by the ton and handle spreading and compaction themselves. If you want help finding installers, ask Hello Gravel when you place your order.