Fill Dirt in Argyle, TX

Delivered fill dirt prices to Argyle typically run in the range of $12 to $25 per ton for residential deliveries, depending on supplier, haul distance, and whether the material is screened. Large orders, closer quarries, or reusable onsite materials can push the price to the low end; remote deliveries, small orders, or specialty screened fill can be at the high end. Hello Gravel shows upfront pricing during checkout and requires a 3-ton minimum for most deliveries.

Hello Gravel connects you with trusted local suppliers and haulers that serve Argyle and the surrounding Denton/Fort Worth area; you can check availability and supplier options by entering your zip code on our site. Typical local sources include nearby quarries, landscaping suppliers, and construction sites reclaiming clean fill; exact suppliers vary by delivery location. If you need a specific quarry name or a large-volume account, contact our sales team and we will coordinate local options.

For under-concrete use, use clean, screened fill dirt free of organics and debris and compact it to specification; however, structural slabs typically require engineered granular fill or compacted Class II road base rather than loose fill dirt. For driveways, crushed stone or crusher-run/road base is a better long-term surface than fill dirt because it drains and compacts to support vehicle loads. If you do use fill dirt for grade-raising only, ask for screened, non-organic material and plan to cap it with road base or gravel for driving surfaces.

For structural work in Argyle (under slabs, pads, or compacted fills) the common target is 90% to 95% of Standard Proctor by lab test with lifts of 4 to 8 inches loose before compaction. For simple yard raising or landscaping, lifts can be 6 to 12 inches, compacted as practical with plate compactors, though these are not substitutes for engineering on structural projects. Always follow any engineer or local permit requirements for critical loads; Hello Gravel can supply material but not onsite compaction services.

Argyle’s storms and periods of high heat can cause uneven settlement, shrink-swell movement, and erosion if fill dirt is not properly compacted and graded. Heavy rains can wash loose, uncompacted fill into low spots and drainageways, while prolonged heat can cause cracking and increased dust in dry fill. Control settlement and erosion with proper compaction, slope grading toward drains, temporary erosion control (straw, silt fence), and capping the fill with gravel or vegetation as soon as practical.

Measure the area in square feet and the desired depth in feet: volume (ft3) = area (ft2) x depth (ft). Convert to cubic yards by dividing ft3 by 27, then convert cubic yards to tons using a typical fill dirt delivery factor of about 1.2 to 1.4 tons per cubic yard (we use 1.3 t/yd3 as a rule of thumb). Example: 1,000 ft2 raised 6 inches = 1,000 x 0.5 = 500 ft3 = 18.5 yd3 ≈ 24 tons using 1.3 t/yd3; use Hello Gravel’s online calculator or contact our team for a site-specific estimate.

You may need permits for large fills, changes to drainage, or grading that affects neighboring properties or floodplains in Argyle; town and county rules vary. Before major deliveries or regrading, check with the Town of Argyle Planning and Zoning and Denton County for grading, stormwater, and right-of-way permits. If your project changes drainage or is in a regulated area, secure permits first and retain engineered plans when required.

For parking pads, compacted road base, crusher-run, or Class II base is usually the best choice—these materials compact tightly, shed water, and support vehicle loads better than raw fill dirt. While fill dirt is cheaper up front, it tends to settle and require more frequent topping and maintenance, so road base or crusher-run is more cost-effective long term. If appearance is important, a compacted gravel cap or paver system over a prepared base gives the best durability in Argyle’s climate.

Standard deliveries to Argyle typically require 2+ business days lead time, with a next-day option available for orders placed before noon CST (additional fee may apply). Seasonal factors like heavy rain events or high summer demand can lengthen lead times, and very large loads may require special scheduling or offloading equipment. Remember Hello Gravel’s 3-ton minimum and that drivers may offer tailgate spreading at their discretion but there are no spreading guarantees.

If fill dirt is used as the finished surface for driveways or pads, expect frequent maintenance: initial settlement typically requires topping up once or twice in the first year and periodic replenishment every 1 to 3 years depending on traffic and drainage. Properly prepared bases of road base or crusher-run require much less topping up and will substantially reduce long-term maintenance. To minimize upkeep in Argyle’s weather, compact and cap fill with a more durable surface material rather than leaving bare fill dirt.