Fill Dirt in Alba, TX

Typical delivered price for fill dirt to Alba, TX ranges widely depending on supplier and distance; expect roughly $8 to $25 per ton as a general range. Final price depends on haul distance, minimum order (Hello Gravel minimum is 3 tons), truck type, and any needed processing or screening; check your zip code on Hello Gravel for exact quotes.

For Alba's clay-prone, hot climate, choose fill dirt with low organic content and good compaction properties (often called select or structural fill). For improved drainage and reduced shrink-swell, contractors will blend in coarse sand or granular material and avoid topsoil; ask suppliers through Hello Gravel for 'select fill' or recommended mixes for local conditions.

Calculate volume first: 10 ft x 20 ft x 0.5 ft = 100 cubic feet, which is about 3.7 cubic yards. Fill dirt typically weighs about 1.1 to 1.4 tons per cubic yard, so you would need roughly 4.5 to 5.5 tons; order 10-15% extra to allow for compaction and settling.

Do not use fill dirt as the driveway surface; it is intended for raising grade and subgrade work, not wear or drainage. For Alba driveways and rural roads, crushed limestone or road base provide necessary load-bearing and drainage properties, while fill dirt may be used underneath as compacted subgrade where permitted.

Use Hello Gravel to check availability by zip code; our platform connects you with local suppliers and hauling fleets that serve Alba and nearby towns. You can request tailgate spreading at checkout, but note drivers perform spreading only at their discretion and Hello Gravel cannot guarantee spreading services.

For non-structural landscape fills aim for 90% Standard Proctor equivalent; for structural fills under foundations you may need 90-95% or an engineer's spec. Compact in lifts of 6-8 inches using a plate compactor for small areas or a walk-behind roller; rental costs in the area commonly run about $80-$200 per day depending on equipment size.

Fill dirt itself does not have a 'lifespan' as a surface, but areas using fill dirt as loose ground will settle and erode over time, especially after heavy rains. If fill dirt is properly compacted and covered with appropriate surface material (lawn, gravel, road base), expect routine maintenance like regrading and adding material after major storms or several seasons.

Local permits may be required for large earthmoving projects, commercial deliveries, or if the work affects drainage, floodplain, or septic systems; Alba and Wood County have different rules depending on scope. Check with the Alba city office or Wood County permitting authority before ordering large loads, and consult Hello Gravel customer service if you need help estimating volume for permit applications.

Fill dirt can be used for general grading and mass fill, but slab backfill usually requires select, well-compacted, low-organic fill that meets engineering specifications. For foundations and slab work in Alba's clay soils, confirm requirements with your engineer or building inspector and order 'select fill' or engineered fill via Hello Gravel when needed.

Alba's hot, dry summers cause clay shrinkage while occasional heavy rains lead to swelling and erosion, so fill dirt that isn't well compacted can settle or wash out after storms. Mitigate issues by compacting in lifts, shaping grade to shed water, adding drainage where needed, and selecting fill with low organic content for better long-term stability.

Plan on ordering an additional 10-20% over calculated volume to account for compaction, settlement, and small measurement errors. For deeper fills or uncompacted loose fills use the higher end of that range, and confirm minimum order quantities and delivery logistics with Hello Gravel before finalizing your order.