Gravel in Sienna Point, TX

Residential gravel delivery in the Texas Region commonly ranges from about $12 to $35 per ton, depending on material type and distance. Some suppliers also charge a per-truck haul or dump fee of about $150 to $400 for a standard tri-axle load (10 to 12 tons) if distance or access is challenging. Hello Gravel often negotiates delivery and may offer free delivery in parts of the region, but prices vary by zip code and supplier.

For hot, humid Texas and clay soils around Sienna Point, crushed limestone and crushed granite are reliable choices because they compact well and shed water while providing a stable surface. Decomposed granite is good for dry-look pathways but can compact and hold moisture in clay if not properly graded. River rock and larger clean stone are best for drainage areas and erosion control, while pea gravel is attractive but can migrate and trap moisture on clay.

A good rule of thumb using common gravel density is: 2u0022 depth = about 0.9 ton, 3u0022 depth = about 1.3 tons, and 4u0022 depth = about 1.7 tons for a 100 sq ft area. Natural variation in material density means you should round up and add 5% to 10% for compaction, waste, and grade. Note Hello Gravel minimum orders start at 3 tons, so small projects often require a larger delivery.

Hello Gravel works with a network of local quarries and suppliers that serve the Texas Region and Sienna Point; availability depends on your exact zip code. Many regional quarries and landscape yards do offer residential delivery using dump trucks, but services and minimums vary by supplier. The fastest way to confirm local options and delivery is to enter your address on Hello Gravel or contact our team for supplier details.

Installed gravel driveway costs in Texas typically run from about $3 to $8 per sq ft for basic installs, and $6 to $12 per sq ft for higher-end installs that include thorough base prep, compaction, fabric, and edging. For a 1,000 sq ft driveway expect total installed costs roughly $3,000 to $12,000 depending on site prep, material choice, access, and whether drainage or grading work is needed. Get itemized estimates so you can compare material, labor, base prep, and equipment line items.

Gravel can significantly improve drainage on clay lots when you use the right gradation and design. For active runoff channels and catchment areas, use clean, open-graded rock (1u0022 to 2u0022 or #2 stone) to allow water to pass; for a stable driveway base use angular crushed stone (3/4u0022 minus or 3/4u0022 clean) over geotextile fabric to prevent mixing with clay. Combine rock with proper slope, swales, or French drains for the best erosion control results in Southeast Texas.

Geotextile fabric and edging are sometimes included but are often listed as separate line items in contractor estimates. Expect geotextile fabric to add about $0.50 to $1.50 per sq ft installed, while edging costs vary by material: recycled plastic or timber edging can be $2 to $6 per linear foot, and concrete or steel edging can be $6 to $12 per linear foot. Ask contractors for a written breakdown so you know whether fabric and edging are included and how they will affect long-term performance.