Gravel in Greater Harmony Hills, TX

Prices vary by type and season, but expect roughly $25 to $60 per ton delivered in Greater Harmony Hills. Local factors like material type (pea gravel, crushed stone, river rock), color, and supplier availability affect price. Specialty or washed gravels often cost more; contact Hello Gravel for an exact quote for your zip code.

For typical landscaping gravel in the Texas region around Greater Harmony Hills, the average is about $30 to $45 per ton, delivered. This covers common sizes used for driveways and beds; finer sands or decorative stones can be higher. Use Hello Gravel’s checkout or call our team for a precise price.

A delivered truckload depends on truck size and material, but most residential deliveries use a tri-axle dump truck that carries about 10–12 cubic yards (roughly 14–18 tons). At $30–$50 per ton, a truckload typically runs between $400 and $1,000 including delivery, though specialty materials or extra fees can raise that amount. Hello Gravel lists transparent pricing at checkout and shows delivery options for your address.

A standard tri-axle dump truck commonly used for residential deliveries holds about 10–12 cubic yards of material, which is roughly 14–18 tons depending on gravel density. Smaller single-axle trucks hold less, and larger end-dump rigs hold more. If you need a specific truck size for your site, tell us at checkout and we’ll coordinate with the supplier.

A full tri-axle load of gravel in Greater Harmony Hills typically costs between $400 and $1,200 delivered, depending on tonnage, material type, and any delivery fees. For example, 15 tons at $40 per ton is $600 before any regional delivery surcharges. Hello Gravel shows final pricing before you check out so you know the delivered cost up front.

Cost depends on width and depth. For a 200 ft long by 10 ft wide driveway at 3 inches deep, you need about 18.5 cubic yards (around 26 tons); at $30–$50 per ton, material cost will be roughly $780–$1,300 plus delivery and compaction. Use Hello Gravel’s calculator or contact our team for a tailored estimate based on your desired depth and gravel type.

Measure the area (length x width) in feet and choose a depth in inches, then use: cubic yards = (length x width x depth in feet) / 27. To estimate tons, multiply cubic yards by about 1.4 (varies by material); always round up and allow extra for compaction and grading. Hello Gravel’s online calculator can do this for you and will enforce our 3-ton minimum order.

Drivers may be able to perform tailgate spreading at their discretion; request spreading at checkout and the driver will assess on arrival. Spreading is not guaranteed due to safety, site access, or equipment limits. If spreading is essential, mention it in Order Notes and call our team to discuss options.

Gravel is a natural material and local geology causes color and texture variation in Greater Harmony Hills. Pictures are representative; exact shade and mix can vary by supplier and quarry. You can add color or appearance notes at checkout and contact Hello Gravel if you need help choosing or want a closer match.