Gravel in Decherd, TN

A standard tri-axle dump truck (common for Hello Gravel deliveries) usually carries about 10 to 12 tons of gravel. Cost depends on the type of gravel and delivery distance; in the Decherd/West Tennessee area you can expect a delivered truckload to range widely, so use per-ton pricing to estimate (for example, 10 tons at $30/ton would be about $300, plus any fees). Remember Hello Gravel has a 3-ton minimum order and you can select delivery dates during checkout.

Buying bulk delivered gravel is almost always cheaper than buying bags from a retail store; choose a common local product like bank run or crusher run to lower per-ton cost. You can also save by picking up material yourself from a local supplier if you have a truck, but Hello Gravel’s delivery network often keeps costs low while handling logistics for you.

Prices vary by material and season, but in the Decherd area gravel commonly falls in the range of about $20 to $45 per ton delivered. Local factors such as type (pea gravel, crushed stone, crusher run), haul distance, and required minimums affect final pricing; check Hello Gravel’s checkout for an exact quote for your zip code.

One ton of gravel in the Decherd/West Tennessee area typically runs between $25 and $45 depending on type and delivery. Specialty decorative gravels will be toward the high end, while common base materials and recycled options are usually cheaper.

Cost depends on width and depth; for a typical single-car driveway 20 ft long by 10 ft wide at a 2 to 3 inch top layer you will likely need around 1.5 to 2.5 tons of material. Given Hello Gravel’s 3-ton minimum and local per-ton rates, expect a small driveway project to start around the price of the 3-ton minimum (check checkout for an exact delivered price), while deeper or wider installs will cost more.

Two inches of gravel is generally only suitable as a thin decorative top dressing, not as a stable driveway surface. For driveways in Decherd's climate you should plan on 4 to 6 inches compacted (with a proper crushed-stone base underneath) for long-term stability and drainage.

Per-foot cost varies with width and depth; for a 100 ft long driveway 12 ft wide at a 4-inch compacted depth you would need roughly 20 to 22 tons of gravel. Using local per-ton ranges, that typically works out to several hundred to over a thousand dollars total, which converts to roughly $6 to $15+ per linear foot depending on material and delivery specifics.

One ton of typical crushed gravel equals about 0.7 cubic yards, which covers roughly 110 square feet at a 2-inch depth or about 55 square feet at a 4-inch depth. Coverage can vary by stone size and moisture, so use these numbers as a close estimate and round up for waste.

Cheaper alternatives include crusher run (a mix of stone and fines), recycled concrete, or reclaimed asphalt millings; these options often cost less per ton and compact well for driveways and access roads. Keep in mind recycled materials may differ in appearance and drainage compared to decorative gravels.

One acre is 43,560 square feet. To cover one acre at 2 inches deep you would need about 269 cubic yards (roughly 375 to 400 tons); at 4 inches deep double that amount. Local hauling and material type will strongly affect total cost, so get a site-specific quote through Hello Gravel.

A typical tri-axle truck holding about 10 tons will cover approximately 1,100 square feet at a 2-inch depth or about 550 square feet at a 4-inch depth. Exact coverage depends on the truck’s load size and the depth you plan to place the gravel.

For a 100 ft long by 12 ft wide driveway at a 4-inch compacted depth you will need about 20 to 22 tons of gravel (roughly 15 cubic yards). Adjust quantities if your driveway is wider, you want a thicker base, or you plan to add a different top layer; Hello Gravel’s material calculator can help with precise amounts.

A layered approach works best: use crusher run or 411 (mixed crushed stone with fines) for a stable compacted base, topped with 57 stone or pea gravel for appearance and drainage depending on preference. Local suppliers in West Tennessee often have ideal mixes for regional soils and freeze-thaw cycles, so ask about what’s commonly used in the Decherd area.

Yes — small projects and driveways can be installed DIY with the right tools: a skid, rake, plate compactor, and proper base preparation. For larger jobs, tight access, or if you want guaranteed compaction and grading, hiring a contractor or using a local hauler is a time-saving option; you can request tailgate spreading at checkout, but drivers perform that service at their discretion.

Putting gravel directly over live grass is not recommended because the grass will decay, create uneven settling, and invite weed growth. For best results remove the sod or at least kill and clear vegetation, install a geotextile fabric if desired, and add a compacted base layer before placing gravel.