Gravel in Cumberland Furnace, TN

Typical delivered prices to Cumberland Furnace most commonly fall roughly between $30 and $60 per ton depending on the material. Final cost depends on the type of gravel (pea gravel and decorative stone are pricier than crushed limestone), distance from the quarry, truck access, order size, and whether next-day delivery or spreading is requested.

In West Tennessee you’ll commonly find crushed limestone (including #57), crusher-run (aka dense graded), pea gravel, and river rock. Use crushed limestone or crusher-run for driveways and bases because they compact well; pea gravel and river rock are better for decorative beds, drainage areas, and walkways.

Standard delivery windows are usually 2 or more business days from order; next-day delivery is often available for orders placed before noon CST for an extra fee. Seasonal constraints include muddy spring/fall conditions and saturated fields after heavy rain, which can delay or change the drop location; schedule deliveries in drier weather when possible.

Cumberland Furnace’s rainfall and wet soils can cause rutting, washboarding, and migration of fines if drainage is poor. Provide a crowned center or slight slope, install culverts at low spots, and consider French drains or swales where water concentrates; geotextile underlayer helps separate clay soils from the gravel and reduce mixing.

Permit and HOA rules vary by property; Cheatham County or any local municipality may have driveway, culvert, or right-of-way requirements, and HOAs can set surface or appearance standards. Before starting, check with Cheatham County building/road department and your HOA (if applicable), and contact state DOT if your driveway ties to a state route.

Use this simple formula: cubic yards = (square feet x depth inches) / 324, then multiply cubic yards by about 1.3 to get tons (regional average). For example, a 1,000 sq ft driveway at 3u0022 depth needs roughly 12 tons; heavier clay soils in West Tennessee may require extra base material, so add 10-25% to your estimate for safety.

Material-only delivered costs are typically $30-$60 per ton in the Cumberland Furnace area; a professional install that includes grading, geotextile, compaction, and proper base can run roughly $40-$75 per ton installed, depending on prep and access. DIY saves on labor but requires equipment rentals, time, and skill to get the base and compaction right—get local bids for accurate pricing.

For regular heavy truck traffic, build a compacted crushed-stone base of 6u0022 to 8u0022 minimum, with 8u0022 to 12u0022 preferred for very heavy loads; install in 2- to 4-inch lifts and compact each lift thoroughly. Add a 2u0022 to 3u0022 wearing course of crushed stone or crusher-run, use a geotextile fabric over soft ground, and add edge restraint to prevent spreading.

Typical maintenance is light grading and refilling low spots every year or two; a full regrade may be needed every 1–3 years in wet or high-traffic areas, with resurfacing every 3–7 years depending on use and drainage. Resurfacing costs vary by tons needed and prep—expect to pay for material plus labor; a rough installed-cost range is about $30–$75 per ton depending on scope and access, so get local quotes.

Hello Gravel connects you with local West Tennessee suppliers and quarries that service Cumberland Furnace; many suppliers require a minimum order (Hello Gravel’s service minimum is 3 tons). Deliveries arrive by dump truck (typically tri-axle); delivery fees vary by distance and site access, free delivery may be available in some areas, and tailgate spreading can be requested at checkout but is performed at the driver’s discretion.