Gravel in Crieve Hall, TN

Prices vary by material, supplier, and truck distance, but in the Crieve Hall/Nashville region expect bulk gravel delivered to typically range from about $20 to $45 per ton (about $25 to $60 per cubic yard). Final price depends on type of gravel, load size, and delivery location; use our zip-check and Get a Quote tool for an exact delivered price.

For clay soils and slopes choose angular, well-graded crushed stone like 3/4u0022 minus or crushed limestone with fines for good compaction and traction. #57 stone drains well but can shift on steep slopes, while pea gravel tends to roll and is not recommended on grades without edging or stabilization.

Local stormwater and driveway rules can apply, especially for new curb cuts, work in the right-of-way, or projects that change drainage patterns; Davidson County/Metro Nashville has stormwater and grading regulations. Before starting, check Metro Nashville planning or contact local permitting to confirm whether a permit, setback, or erosion-control measures are required.

For a 20x20 (400 sq ft) area a typical compacted depth is 4 to 6 inches for a base, which equals about 5 to 7 cubic yards or roughly 7 to 10 tons using 3/4u0022 crushed stone; if you include a thicker base (6u0022 or more) plan on 10 to 15 tons. Always round up for compaction and waste, and remember Hello Gravel's minimum order is 3 tons.

With proper base, edging, and maintenance a gravel driveway in the Tennessee climate can perform well for many years, but it requires periodic upkeep. Expect to regrade and refill low spots after heavy rainy seasons—typically minor touch-ups every 1 year and a top-dress (2–3 inches) every 2–5 years depending on traffic and drainage.

Yes—on Crieve Hall's clay soils and on slopes a geotextile fabric plus a compacted base course is usually worth the extra cost because it reduces rutting, improves drainage, and lengthens service life. For modest budgets consider fabric with a 4–6u0022 compacted base under the topcoat to get the best value.

Gravel is typically the lowest upfront cost and fastest to install, but it requires ongoing maintenance like regrading and topping. Asphalt and concrete cost more up front but need less frequent routine maintenance; choose gravel when budget flexibility and permeability matter, and asphalt/concrete when you want a lower-maintenance, smooth surface.

Clean, washed angular stone in the 3/4u0022 to 1-1/2u0022 range (often called clean stone or #57 for smaller sizes) works best for French drains and swales because it resists clogging and passes water quickly. For erosion control on steeper slopes use larger riprap or 2u0022+ angular stone and pair it with filter fabric and vegetation where possible.

Hello Gravel works with local suppliers and haulers; the minimum order is typically 3 tons and delivery fees vary by distance, material, and truck type. Many areas have free delivery for full loads, but the only way to know exact minimums and fees for your address is to enter your zip code on our site or request a quote.

Good drainage is the top priority: slope the subgrade away from structures, install swales or French drains where water concentrates, and use solid edging to keep material in place. Also install a geotextile under the base, compact the base in layers, and use angular crushed stone to lock the surface together.

Contractor installed gravel driveways in the Tennessee region often fall in a broad range—expect roughly $2 to $6 per square foot depending on site prep, material choice, and access, or get multiple local bids for accuracy. Because site conditions and drainage needs vary, request itemized quotes listing grading, fabric, base material, compaction, and topcoat so you can compare apples to apples.