Gravel in North Augusta, SC

A typical tri-axle dump truck in the North Augusta area carries about 10 to 12 cubic yards (roughly 12 to 16 tons) of gravel. Expect delivered prices to range widely by material and supplier—roughly $450 to $900 for a truckload for common base or driveway gravels. Exact pricing depends on gravel type, delivery distance, and site access; check your zip code on Hello Gravel for an itemized quote.

A 10-yard load of gravel in this region commonly costs about $300 to $800 delivered, depending on the gravel type (base, decorative, washed) and seasonal demand. That 10 yards typically equals about 13 to 14 tons, so final cost will vary with per-ton pricing and any delivery add-ons. Use Hello Gravel’s checkout to see transparent pricing for your address.

Per-ton prices in the Augusta/North Augusta area usually fall between about $30 and $70 per ton delivered for typical aggregates, though decorative or specialty gravels cost more. Prices vary based on stone type, local quarry supply, and delivery logistics. Remember Hello Gravel’s minimum order is 3 tons, so smaller needs are often sold in bags or by the yard through local retailers.

Buying in bulk delivered to your site is usually the most cost-effective option for projects over a few tons, and recycled crushed concrete or bank-run gravel often offers the lowest per-ton price. If you have a truck and time, picking up directly from a local quarry can save money but adds labor and hauling cost. Check Hello Gravel’s local supplier options and compare material types to find the best balance of price and performance.

Cost depends on driveway width, depth, and material. For example, a 20 ft long by 10 ft wide driveway with a 3-inch top layer may require roughly 3 cubic yards of finish gravel and cost $150 to $600 for the finish material alone; adding a proper compacted base will increase material and labor costs. For accurate pricing, calculate cubic yards needed and get a delivery quote for your zip code through Hello Gravel.

Two inches is usually too thin for a driveway in this area; you typically want 4 to 6 inches of compacted base (crushed stone/crusher run) plus a 2 to 3-inch top dressing of finer gravel. North Augusta’s local soils can be clayey and hold moisture, so a proper base helps prevent rutting and washout. Drivers may offer tailgate spreading at their discretion, but plan on compacting and layering for durability.

Costs vary with driveway width and depth, but a 100 ft long by 12 ft wide driveway with a 6-inch compacted base and 2-inch finish coat might require roughly 28 to 35 cubic yards of material. Material-only costs for that scope commonly range from about $1,000 to $3,000 depending on material selection; labor, grading, and drainage work add to the total. Get a site-specific estimate via Hello Gravel so the local supplier can account for access and regional material rates.

Coverage depends on depth: at 2 inches 1 cubic yard covers about 162 sq ft, at 3 inches about 108 sq ft, and at 4 inches about 81 sq ft. Use the rule 27 cubic feet per cubic yard and divide by the required depth in feet to calculate coverage for your project. This helps convert between cubic yards, tons, and surface area when ordering.

A tri-axle dump truck usually carries about 10 to 12 cubic yards. That quantity will cover roughly 1,620 sq ft at 2 inches, 1,080 sq ft at 3 inches, or 810 sq ft at 4 inches, depending on the depth you plan to lay. Exact truck capacity and coverage vary by supplier, so confirm with your Hello Gravel quote.

Yes; many homeowners install gravel themselves if the project is small. Key steps are clearing and grading the area, installing proper drainage, adding and compacting a base layer, and then applying and compacting the finish gravel. If you’re unsure about site prep or drainage—important in our humid Southeastern climate—consider hiring a contractor or asking Hello Gravel’s team for guidance.

Recycled crushed concrete or local bank-run gravel is often cheaper than manufactured decorative stones. These alternatives work well for driveways and utility areas but may not provide the aesthetic finish of decorative or washed gravels. Regional availability affects price and suitability, so check Hello Gravel for local options and samples.

Twenty tons of typical gravel equals roughly 14 to 15 cubic yards (exact conversion depends on stone density). At 3 inches depth that will cover about 1,512 to 1,620 sq ft; at 4 inches it covers about 1,080 to 1,160 sq ft. Use your desired depth to convert tons to coverage or ask Hello Gravel’s calculator for a precise estimate for your zip code.

Generally, bank-run gravel, crusher run, or recycled crushed concrete are among the least expensive options locally because they require less processing. Prices vary by quarry and local demand, and decorative or washed gravels cost more. Check local availability and live pricing via Hello Gravel before deciding.

Measure the length and width of the area, decide on the desired depth, then use the formula: cubic yards = (length ft x width ft x depth ft) / 27. Convert cubic yards to tons using local density (about 1.3 to 1.5 tons per cubic yard for many gravels) or use Hello Gravel’s material calculator for an instant estimate based on local material types. Always add 5-10% for compaction and waste.