Gravel in Hodges, SC

A common tri-axle dump truck used in our network carries about 10 to 14 cubic yards of gravel, which usually equals roughly 10 to 15 tons depending on material. That amount will cover about 1,600 to 2,000 sq ft at 1 inch depth, or about 480 to 600 sq ft at 3 inches depth. Exact capacity and coverage vary by stone type and moisture, so request a quote for precise numbers.

In Hodges and the surrounding West South Carolina region, plain bulk sand is often cheaper per ton than decorative or crushed gravel because it is more abundant and has less processing. However, prices depend on type, local availability, and delivery distance. Use our online quote tool to compare current, delivered prices for your zip code.

Ordering in bulk (minimum 3 tons or more) and choosing standard delivery (2+ business days) is usually the most economical option. Also selecting materials that are commonly sourced in the region lowers haul distance and cost. For the best price, get a quote and compare material types available in your area.

u0022Type 4u0022 can refer to a local DOT or supplier grading for a compactable base material, but definitions vary by state and supplier. In Hodges, clarify the exact spec with your Hello Gravel quote or supplier—tell us where you plan to use it (driveway base, drainage, etc.) and we will match the right local product. Don’t assume the same name means the same gradation across all suppliers.

Cost depends on length, depth, and material choice. For example, a 20 ft by 50 ft driveway (1,000 sq ft) built with a 3-inch compacted top layer typically needs about 12 tons of gravel; at typical delivered prices this often ranges from several hundred to a low four-figure cost. For an exact estimate, enter your address and driveway dimensions on our site to get a delivered quote.

Two inches of loose gravel is usually not enough for a driveway in Hodges’ climate and soils unless it is layered over a solid, well-compacted base. For most driveways we recommend a compacted base of 4 to 6 inches of crushed stone plus 2 to 3 inches of top gravel for durability and drainage. Lighter, temporary driveways can sometimes use thinner layers, but they will need more maintenance.

Per-foot cost varies with width and material, but a practical way to estimate is by area. For a 12-foot-wide, 100-foot-long driveway (1,200 sq ft) with a 3-inch top layer you might need roughly 14 to 16 tons of gravel; multiply tons by the delivered price per ton to get a per-foot cost. Use our calculator or request a quote for a precise per-foot number for your Hodges address.

Ten cubic yards of gravel typically weigh between about 12 and 15 tons depending on the type and moisture content. Pricing for a 10-yard load depends on the material and delivery distance; get a quote through Hello Gravel to see current delivered rates for your zip code. If you need help converting yards to tons for your chosen material, our team can assist.

Coverage depends on the depth you want. As a rule of thumb, 1 ton of gravel usually covers about 100 to 120 sq ft at 2 inches depth, about 200 to 240 sq ft at 1 inch depth, and roughly 65 to 80 sq ft at 3 inches depth. These are approximate figures for Hodges materials; use our calculator for a site-specific estimate.

Recycled crushed concrete or recycled asphalt (RAP) are often cheaper local alternatives and can be excellent for driveways and base layers when allowed by local codes. Crushed screenings or crusher fines can also be economical for paths and patios. Consider drainage, appearance, and whether you need a compacted hard surface when choosing an alternative.

#3 gravel usually refers to 2-inch to 4-inch clean stone—larger, rounded or crushed pieces used for drainage, erosion control, or riprap. In the Hodges area it’s commonly used in culverts, French drains, and under large pipes. If you need a specific size or visual sample, request photos or stop by a local supplier through our platform to confirm.

Four cubic yards of gravel will cover about 648 sq ft at 2 inches depth, about 324 sq ft at 4 inches depth, and roughly 1,296 sq ft at 1 inch depth. These are approximate and assume typical local densities; for projects in Hodges, check our material calculator or ask our team to confirm quantities for your exact application.

Crusher fines (also called decomposed granite or DG when local) and polymer-modified gravels can compact into a firm, stable surface that resists displacement better than loose gravel. These materials perform differently in Hodges’ humid climate and may require edging and compaction equipment to maintain a hard surface. They will not match the compressive strength of concrete, but they can provide a low-cost, hard surface alternative when installed correctly.

Cost for 1,000 sq ft depends on desired depth and material. For a 2-inch compacted layer you will need roughly 8 to 10 tons; multiply that by the delivered price per ton to estimate cost. For an accurate price tailored to Hodges, enter your zip code on our site or contact our sales team for a delivered quote.