Gravel in Gresham, SC

Prices vary by material and supplier, but in the West South Carolina area a bulk load of common driveway gravel typically ranges from about $30 to $65 per ton before delivery. Total cost depends on the gravel type, how many tons you need, and delivery distance from nearby suppliers (Gresham is a small town, so some loads may come from nearby larger towns). For an exact price for your address, check your zip code on Hello Gravel or get a local quote.

Buying in bulk (by the ton or cubic yard) and having it delivered is usually cheapest compared with buying bags at a big-box store. If you have truck access, picking up directly from a local supplier can save delivery fees, but factor in your time and vehicle capacity; Hello Gravel handles delivery coordination and often shows transparent per-ton pricing so you can compare total cost.

Assuming a 20 ft long by 10 ft wide single-car driveway, you need about 1.9 cubic yards (roughly 2.6 tons) for a 3-inch top layer. Hello Gravel has a 3-ton minimum, so plan for at least 3 tons; delivery fees depend on supplier distance but often range from a small flat fee up to $100+ in rural areas—contact us with your zip code for an exact delivery charge and itemized quote.

Two inches is fine for a walking path or temporary finished surface, but it is too thin for a driveway on Gresham's clay soils. For a long-lasting driveway, plan a 4-6 inch compacted crusher-run base with a 2-3 inch topcoat of clean 3/4u0022 stone; for heavy vehicles or poor drainage increase the base to 6 inches and add geotextile fabric and proper grading.

Use these quick conversions: 1 cubic yard of gravel weighs roughly 1.3 to 1.5 tons (we use 1.4 tons as a common estimate), so 1 ton is about 0.7 cubic yards. One ton will cover about 115 sq ft at 2u0022 depth or about 77 sq ft at 3u0022 depth. A typical tri-axle dump truck used for Hello Gravel deliveries holds roughly 10-12 cubic yards (about 14-17 tons), though exact capacity depends on the truck and local supplier.

For a durable driveway in Gresham, start with crusher-run or 'Type 4' (a mixed-size crushed stone with fines) compacted for the base, then finish with 3/4u0022 crushed stone or #3 stone as a wearing surface. Crusher-run locks together when compacted, which is helpful on local clay soils, while clean 3/4u0022 stone provides good drainage and a stable driving surface; availability can vary by supplier so check product photos and specs in your quote.

Yes—on Gresham's clay-rich sites it is best to install a compacted base rather than just laying sand. Use geotextile fabric to separate soil and gravel, install 4-6 inches of compacted crusher-run for a typical driveway (6+ inches if heavy loads), and slope the area for drainage; sand is not a substitute for a compacted crushed-stone base.

Common lower-cost alternatives include recycled concrete or reclaimed asphalt millings, which can be cheaper per ton than decorative crushed stone but have different aesthetics and compaction needs. Permeable pavers and asphalt are more expensive upfront; crushed stone is often the most cost-effective for small residential driveways when you factor materials and delivery—get local quotes to compare exact per-ton and delivery costs for Gresham-area suppliers.

Costs depend on depth and material, but a basic estimate for a 20 ft by 10 ft driveway at a 3-inch finished depth is roughly $150 to $450 for materials and delivery in the Gresham area, with most jobs hitting the lower end if you accept the 3-ton minimum. If you add a compacted crusher-run base, heavier depth, hauling from farther away, or spreading services, expect higher costs—ask Hello Gravel for a precise quote based on your address and desired specs.

Products that harden include polymer-stabilized gravel mixes, resin-bound gravel, and some recycled asphalt mixes that bind when compacted. Availability in Gresham depends on local suppliers; Hello Gravel can check supplier inventories for stabilized or polymer-modified mixes in your zip code and include that option on your quote if it is stocked locally.

Calculate cubic yards with (length ft x width ft x depth ft)/27, then multiply by 1.4 to approximate tons. Remember Hello Gravel's 3-ton minimum and the option to request tailgate spreading at checkout (drivers perform spreading at their discretion). For help, use our online material calculator, enter your Gresham address to check availability and delivery times, or call/text our team for a custom estimate.