Fill Dirt in Wooster, OH

Prices vary by supplier and truck size, but in the Wooster area fill dirt typically ranges from about $10 to $30 per ton or $8 to $25 per cubic yard depending on quality and delivery. Hello Gravel requires a minimum order of 3 tons and provides upfront quotes, so the best way to get an exact price for your address is to enter your zip code and request a quote.

Fill dirt is soil used to raise or level ground and is generally low in organic matter, while gravel is crushed stone used for drainage, driveways, and decorative surfaces. In Wooster projects, use fill dirt to change grade or fill holes, and use gravel where you need a stable, draining surface.

Yes, fill dirt is generally cheaper per ton or per cubic yard than most gravels because it is plain soil rather than processed stone. Choose fill dirt when you just need to build up grade; pick gravel when drainage, stability, or appearance matters.

Coverage depends on compaction and depth, but 1 ton of fill dirt in Ohio is roughly 0.7 to 0.8 cubic yards. That will cover about 60 square feet at a 4-inch depth or about 40 square feet at a 6-inch depth; always order a bit extra to allow for settling and compaction.

Cost for a truckload depends on truck type and how many tons you need; tri-axle dump trucks commonly used by local haulers carry more material and will cost more than smaller dump trucks. For an accurate estimate, request a quote from Hello Gravel specifying the number of tons or cubic yards and your Wooster address, since local haul distance and truck availability affect price.

It depends on your pickup's payload rating, but many half-ton pickups cannot safely carry a full ton of bulk fill dirt because soil is heavy and bulky. Check your truck’s payload plate, and if unsure, use Hello Gravel’s delivery service to avoid overloading and potential damage.

You can place gravel over fill dirt, but the fill dirt should be properly compacted and graded first to prevent uneven settling. For driveways or high-traffic areas in Wooster’s freeze-thaw climate, add a compacted base course of crushed stone and consider a geotextile fabric to separate fill dirt from gravel for better long-term performance.

Buying in bulk and ordering directly through a platform like Hello Gravel typically gives the best per-ton price, and choosing local suppliers reduces haul fees. Also consider off-peak seasons and ordering the minimum 3-ton load or larger to lower the per-unit cost; always compare quotes for the best deal.

Fill dirt itself does not 'expire,' but newly placed fill will settle and compact over time, especially through winter freeze-thaw cycles common in Wooster. Expect some settling in the first year and plan to top up or regrade as needed; proper compaction at placement reduces long-term settling.

Measure the area and calculate how many tons or cubic yards you need, clear the drop zone of vehicles and obstacles, and mark any overhead lines or tight access points. Call 811 to mark underground utilities, make sure a dump truck can safely enter and exit your property, and request tailgate spreading at checkout if you want the driver to consider it (it's performed at their discretion).

Most suppliers provide fill dirt that is largely free of topsoil, organic matter, and construction debris, but composition can vary by source in Ohio. If you need a clean, rock-free fill, request that specification in your order notes and confirm with the supplier through Hello Gravel before delivery.

Fill dirt is useful for raising grades or filling low spots but is typically low in organic matter and not ideal as final planting soil. For lawns or gardens, put a layer of topsoil over the compacted fill dirt or amend the fill with organic matter to support healthy plant growth.

Hello Gravel’s minimum order is 3 tons, standard delivery is usually 2 or more business days, and next-day delivery is available for orders placed before noon CST for an additional fee. Delivery is by contracted local haulers using dump trucks, and tailgate spreading may be available at the driver’s discretion.

Calculate area in square feet multiplied by desired depth in inches, then divide by 324 to get cubic yards (area x depth / 324 = cubic yards). Convert cubic yards to tons using an estimated factor of about 1.2 to 1.4 tons per cubic yard for local soils, or use Hello Gravel’s material calculator for a tailored estimate.