Fill Dirt in Louisville, OH

Material prices for fill-dirt in the Louisville area generally run low compared with decorative aggregates; expect the delivered price to commonly fall in a range around $8 to $25 per ton depending on supplier, local availability, and moisture. Hello Gravel's platform shows transparent pricing for your zip code and a minimum order of 3 tons; exact costs vary by supplier and delivery distance, so check the instant quote for your address.

Minimum orders in the Louisville area are often 3 tons (Hello Gravel minimum), with most deliveries made by tri-axle dump trucks that carry roughly 10 to 12 cubic yards (about 12 to 18 tons depending on material). Smaller jobs may be served by single-axle or tandem trucks when available, but expect standard haulers to prefer tri-axles for efficiency.

A 20 x 30 ft area is 600 sq ft. At 6 inches (0.5 ft) you need about 11.1 cubic yards, which typically equals roughly 13 to 17 tons depending on moisture and compaction (use ~1.2 tons/yd^3 as a starting point). At 12 inches (1 ft) you need about 22.2 cubic yards, or roughly 26 to 34 tons; add 10-20% extra to allow for settlement and compaction.

Fill-dirt can be used over clay soils, but West Ohio's clay and seasonal freeze-thaw can hold water and cause movement if the fill is poorly graded or not compacted. For best results use fill-dirt with low organic content, place it in thin lifts with mechanical compaction, and consider adding a granular layer or drainage under the fill to reduce frost heave risk.

Use fill-dirt to raise grades or fill low spots because it is inexpensive and compactable, but it is not a durable wearing surface. For driveways, a crushed limestone or crushed stone base is the correct structural layer; topsoil is for planting and not for structural use. Typical approach: bring the grade up with fill-dirt, install a compacted crushed-stone base, then a surfacing layer (crusher run, asphalt, or pavers) as needed.

Permit requirements vary by township or city and by the scale of the project; small residential deliveries rarely require a permit, but large fills that change drainage, alter setbacks, or exceed local grade limits often need approval. Contact your local building or zoning office before hauling large volumes, and Hello Gravel can help point you to local resources when you place the order.

Fill-dirt used as a base will perform well if properly placed and compacted, but it can settle over months to a year and usually requires follow-up grading and occasional top-up. For driveways, long-term durability depends on the structural base (crushed stone) above the fill; expect periodic maintenance like regrading low spots and adding material after heavy settling or erosion events.

Common add-ons include tailgate spreading (driver discretion), machine spreading with a skid steer or bobcat, mechanical compaction, and finish grading; these services are frequently available for an extra fee and vary by supplier. Request these services at checkout or call Hello Gravel to confirm availability and pricing before delivery.

Hello Gravel connects you with local suppliers and haulers that deliver to the Louisville area; enter your zip code on our site to get instant quotes and delivery availability. Many regional landscape and aggregate yards also serve West Ohio, but using Hello Gravel ensures transparent pricing, the 3-ton minimum, and scheduled delivery windows from trusted local partners.

Grade turf and soil to slope away from foundations at least 2% (about 1/4 inch per foot) and create shallow swales or French drains where water concentrates to move runoff away from structures. Compact fill in lifts, use coarser material or a drainage layer at critical spots, stabilize exposed slopes with seed, mulch, or erosion control blankets, and account for Ohio's freeze-thaw cycles by avoiding fine, frost-susceptible fills in drainage paths.