Fill Dirt in Marysville, OH

Generally yes. In Marysville and West Ohio, plain fill dirt (native soil, clay, or subsoil) is usually less expensive per ton than decorative or crushed gravel because it has lower processing and sourcing costs. Final price depends on availability, delivery distance, and whether you need screened or screened-and-clean fill.

A standard tri-axle dump truck used by our network typically carries about 10 to 12 cubic yards of loose fill dirt, which translates roughly to 12 to 16 tons depending on moisture and soil type. Exact capacity and weight vary by truck and supplier, so confirm with your Hello Gravel quote before ordering.

Prices vary by supplier, season, and whether the soil is screened or blended; Marysville rates are generally in line with West Ohio regional pricing. For an accurate number, request a local quote through Hello Gravel since we source from nearby suppliers and show transparent pricing for your zip code.

Fill dirt is primarily soil (subsoil, clay, sand, or silt) used to raise grade or fill holes; it compacts well but does not provide good drainage or surfacing. Gravel is rock aggregate used where drainage, surface stability, or decorative appearance is needed. Use fill dirt to build or level ground first, then add gravel or topsoil as a wearing or planting layer as needed.

To raise 1,000 sq ft by 6 inches (0.5 ft) you need 1,000 x 0.5 = 500 cubic feet, which is about 18.5 cubic yards. Since a cubic yard of loose fill dirt commonly weighs around 1.1 to 1.4 tons, expect roughly 20 to 26 tons; order a little extra for compaction and settling and use Hello Gravel's calculator to get a precise recommendation.

You can, but it often causes settling or rutting if the fill dirt is loose or not compacted. In Marysville's freeze-thaw conditions, compacted lifts of fill dirt and a geotextile fabric or a compacted crushed-stone base are recommended before placing surface gravel to reduce migration and sinking.

No. Two inches of gravel is generally too thin for a driveway — it will move and compact quickly. For driveways over fill dirt you should first compact the fill in lifts, then install a 4 to 6 inch compacted crush-and-run or crushed stone base, and top with 2 to 3 inches of wearing gravel if desired.

A tri-axle truck carrying about 10 cubic yards will cover roughly 1,620 sq ft at 1/4 inch depth, 324 sq ft at 1 inch depth, or 54 sq ft at 6 inches depth. Use cubic yard coverage (1 cubic yard = 27 cubic feet) to calculate exact coverage for your project and ask Hello Gravel for a delivery estimate for your Marysville address.

Buy in bulk from a local supplier and schedule delivery during normal season to avoid rush fees; combining orders with neighbors or contractors can lower per-ton cost. Use Hello Gravel to compare vetted local suppliers and transparent delivery fees so you get competitive pricing without surprise haul charges.

Coverage depends on desired depth and soil density, but as a rule of thumb one ton of loose fill dirt equals about 0.7 to 0.9 cubic yards. That will cover roughly 75 to 125 sq ft at 2 inches depth, about 35 to 55 sq ft at 4 inches, and much less at deeper fills; for precise needs use Hello Gravel's calculator with your desired depth.

Costs per truckload depend on truck size, distance, and whether the material is screened or blended; Marysville truckloads commonly range in the local market but vary by supplier and season. The fastest way to get an exact truckload price is to enter your zip code on Hello Gravel and get a local quote with delivery options and minimum-order details (minimum 3 tons).

Late spring through early fall are generally best because the ground is drier, making compaction easier and reducing tracking and rutting. Avoid delivery when the ground is frozen or saturated after heavy rains; if you must work in wet or cold months, plan for extra compaction and erosion control.

Yes — fill dirt is commonly used to regrade and level yards, patch low spots, and raise grades away from foundations. For lasting results, place fill in 4 to 6 inch lifts and compact each lift, finish the top with several inches of topsoil if you plan to seed or plant, and consider hiring compaction equipment if the area is large.

Start with properly compacted fill dirt in lifts, then add a compacted crushed-stone or crush-and-run base, and consider a geotextile fabric between the fill and base to reduce mixing and migration. This combination helps with drainage, reduces frost heave in West Ohio weather, and gives a stable surface for walkways, driveways, or patios.