Gravel in Wilkesboro, NC

Delivered price varies by material and supplier, but expect a full tri-axle dump truck load to contain roughly 10-14 tons of gravel. Hello Gravel's platform shows local delivered pricing when you enter your zip code; many Wilkesboro orders fall in a per-ton range that makes a truckload more economical than small pickups. Tailgate spreading can be requested at checkout, but drivers perform it at their discretion and spreading is not guaranteed.

To estimate material, use cubic yards = (area ft2 * depth inches) / 324; 1 cubic yard of gravel covers about 162 sq ft at 2u0022 and about 81 sq ft at 4u0022. In Wilkesboro you can expect roughly 9 tons for 2u0022 and 17.3 tons for 4u0022; at a typical delivered per-ton range of about $35 to $70, material costs run roughly $315–$630 at 2u0022 and $605–$1,210 at 4u0022. Final price depends on the exact stone type, supplier, and any delivery or spreading fees.

Installed costs vary with length and site prep. A common installed range for a properly prepared gravel driveway in this region is about $1.50 to $4.00 per sq ft, including materials, grading, and compaction. For example, a 20 ft wide by 100 ft long driveway (2,000 sq ft) typically runs about $3,000–$8,000, with the lower end for minimal prep and a light surface and the higher end where excavation, base rock, and drainage work are required.

For a 20x20 area (400 sq ft) expect installed costs roughly $600–$1,600 using the $1.50–$4.00 per sq ft rule of thumb. Material-only for a 3u0022 depth would be about 7.4 cubic yards (roughly 10–11 tons), so material cost alone at $35–$70 per ton would be about $350–$770. Exact numbers depend on gravel type, delivery, and whether the contractor includes grading and compaction.

For light-use residential driveways 2u0022 of top-surface gravel can work temporarily, but 3u0022 to 4u0022 is recommended for year-round durability in West North Carolina, especially with seasonal rain and freeze-thaw cycles. If you do minimal prep, use 3–4u0022 of compacted crushed stone with a good base layer; if you have heavy vehicles or poor subgrade, add a crushed-stone base (4–6u0022) beneath the wearing layer.

Buying in bulk by the truckload is usually the most cost-effective option per ton, followed by purchasing by the ton or cubic yard at a local yard; small pickup loads are the most expensive per ton. Typical delivered per-ton ranges in this area are roughly $35–$70 depending on material and distance, while retail yard or pickup pricing may push toward the higher end. Hello Gravel’s minimum order is 3 tons, and the platform will show per-ton or truckload pricing for your zip code.

Coverage depends on depth: 1 cubic yard covers about 162 sq ft at 2u0022, 108 sq ft at 3u0022, and 81 sq ft at 4u0022. Using a conversion of about 1.4 tons per cubic yard, 1 ton covers roughly 116 sq ft at 2u0022, 77 sq ft at 3u0022, and 58 sq ft at 4u0022. Use these numbers to calculate quantities before ordering and round up for compaction and waste.

For driveways in Wilkesboro, crushed stone or crushed gravel with fines (commonly called 3/4u0022 crushed or dense grade aggregate) is a good all-purpose choice because it compacts and locks together. Pea gravel is decorative and drains well but shifts under traffic, so it usually needs a thicker layer and edging; it can also be slightly more expensive. Coarser base materials (Type 2 or #3) are used under the surface for stability; expect surface crushed stone to be competitively priced locally while decorative gravels can cost more per ton.

Color and finish can affect availability because Hello Gravel sources materials regionally, so colors reflect local geology and some colors or decorative mixes may be limited. Most standard crushed stone and driveway gravels are similar in price, but specialty or colored decorative gravels can cost more and may have longer lead times. Choose color based on home style and practicality: darker stones hide tire marks, lighter stones brighten spaces, and samples from your supplier help set expectations.

Hello Gravel connects you with local suppliers and contracted haulers that serve Wilkesboro; we do not operate branded trucks. Typical lead time on the platform is 2+ business days for standard delivery, with next-day delivery available for orders placed before noon CST for an additional fee. Many local deliveries are free or included in the per-ton price, but fees vary by supplier, distance, and whether spreading is requested; check your quote or call our team for specific local options and scheduled dates.