Gravel in Vale, NC

Delivered cost depends on material, distance to supplier, and truck size. In Vale, a typical tri-axle load (about 10–16 tons) often runs roughly $400–$1,000 total, or about $35–$65 per ton as a broad estimate. For an exact price enter your zip code on our site or contact our team for a no-obligation quote.

Multiply the driveway area (length x width) by depth to get volume. Example: a 100 ft long x 10 ft wide driveway (1,000 sq ft) needs about 8 tons at 2u0022 depth, about 16 tons at 4u0022, and about 24 tons at 6u0022. Use these as guides and add 5–10% for compaction and spreading.

One ton of gravel covers approximately 125 sq ft at 2u0022 depth, about 62 sq ft at 4u0022 depth, and about 41 sq ft at 6u0022 depth, using a typical regional density. These are approximate values—actual coverage varies by gravel type and compaction, so we recommend ordering a little extra for waste.

Costs vary by site prep, material choice, and contractor rates. For a 20 ft x 100 ft driveway at 4u0022 (about 32 tons), expect material+delivery roughly $1,200–$2,000 (at about $40–$60/ton) and installation/prep labor often $800–$3,000, so a total in the range of about $2,000–$5,000. Get local contractor quotes and a Hello Gravel delivery quote to narrow the estimate.

Two inches is generally too thin for a driveway surface—it wears quickly and can rut in wet weather. For most residential driveways in Vale we recommend 4u0022 of compacted gravel over a properly prepared base, and 4–6u0022 if you expect heavy vehicles. Also consider a compacted base layer (crusher run or geotextile) under the surface gravel for better longevity.

A 20 ft x 20 ft driveway has 400 sq ft. At 4u0022 depth you will need about 6.5 tons of gravel, and at 6u0022 about 9.8 tons. We recommend ordering at least 7–10% extra to cover compaction, grading, and small adjustments; note Hello Gravel minimum orders start at 3 tons.

With good installation and routine maintenance, a gravel driveway in West North Carolina typically lasts 10–20 years before major replenishment is needed. Expect ongoing maintenance like grading, filling ruts, and adding 1–2 inches of fresh gravel every 3–5 years; annual upkeep costs are often modest, commonly $50–$300 depending on size and repairs. Proper drainage and occasional topping greatly extend lifespan.

Crusher run (also called 3/4u0022 minus or road base) and bank run gravel are usually the most cost-effective durable options for driveways in this region because they compact well. Pea gravel is often cheaper in some areas but can shift and require more maintenance; crushed stone with fines gives the best balance of price and stability. Prices vary by local supply, so check Hello Gravel for local material options and pricing.

A 7x14 dump trailer typically holds about 4–7 cubic yards of gravel depending on side height, which is roughly 3.5–7 tons depending on material density and trailer payload limits. For small projects under about 5–7 tons, trailer pickup can be cost-effective if you have the right vehicle and permit weight. For larger projects (over ~8–10 tons) bulk delivery is usually cheaper, easier, and faster.

For a 1,000 sq ft area at 4u0022 depth (about 16 tons), bulk delivery is usually the most cost-effective option for homeowners doing the work themselves. Local pickup can work for smaller volumes under a trailer's capacity, while contractor installation increases cost but saves time and ensures professional grading. Use Hello Gravel's calculator and delivery quotes to compare material+delivery versus contractor bids for your specific site.