Gravel in Palisades, NC

A typical truckload (about 10–12 tons) delivered to Palisades usually runs in the range of $250–$900 depending on gravel type (washed, crushed, decorative) and local supplier rates. Hello Gravel delivers to the Palisades area through local haulers—minimum order is 3 tons, standard delivery is 2+ business days, and next-day delivery may be available for orders placed before noon CST for an extra fee. Final price and delivery fee (if any) are shown at checkout based on your zip code and material choice.

In North Carolina, most common gravel types typically sell for about $20–$60 per ton delivered, with specialty or colored gravels on the higher end. Suppliers and haulers often give lower per-ton pricing for larger, full-truck orders, so ordering by the truckload (10–12 tons) is the most cost-effective for big projects. Hello Gravel negotiates local rates and will show bulk pricing options during checkout; remember we require a 3-ton minimum.

Costs depend on width, depth, base work, and gravel type; a simple 20-foot-long driveway at a single-car width (about 10 ft) is roughly 200 sq ft. If you place a 3-inch top layer you’ll need about 3 tons (our minimum), which could cost roughly $90–$180 for material at $30–$60/ton plus any delivery fee (often free in many areas). If you include base prep, grading and compaction, contractor labor can add several hundred to a few thousand dollars, so expect total installed costs to vary widely depending on site conditions.

Coverage varies with depth and material, but a good rule of thumb is: 1 ton covers about 230 sq ft at 1 inch, 115 sq ft at 2 inches, 77 sq ft at 3 inches, and 38 sq ft at 6 inches. Delivered cost per ton in the Palisades/North Carolina region typically runs about $20–$60 depending on gravel type and local supplier. Actual coverage and delivered price can shift with compaction, stone density, and regional sourcing, so check the calculator at checkout or ask our team for a site-specific estimate.

For small home projects, bagged gravel is convenient but much more expensive per ton. For most DIY and contractor jobs, buying bulk by the ton is the best balance; ordering a full truckload (10–12 tons) gives the lowest per-ton price for large projects. Because Hello Gravel’s minimum order is 3 tons, bulk by the ton is usually the most practical and cost-effective option for Palisades homeowners.

A 20x20 pad is 400 sq ft. For a common 4-inch depth you need about 5 cubic yards, which is roughly 6–8 tons of gravel depending on material density, so material-only cost will often fall between about $150–$480 at $25–$60/ton delivered. Add base preparation, grading, compaction, and labor and the installed price can range from several hundred to a few thousand dollars depending on site access and contractor rates; get an on-site estimate for an accurate installed cost.

Compacted gravel can work well for many Palisades driveways, especially for light to moderate daily use, and it is much cheaper to install than concrete. It requires proper base preparation, drainage, edging, and periodic maintenance (regrading and topping up) and is less suitable for heavy constant loads or places needing a totally smooth, sealed surface. Typical installed gravel driveways often cost $1–$3 per sq ft versus concrete which often runs $4–$12 per sq ft, but long-term maintenance should be factored into your decision.

Hello Gravel’s minimum order is 3 tons for Palisades deliveries, and standard delivery lead time is 2+ business days. Next-day delivery may be available for orders placed before noon CST for an additional fee, and delivery fees vary by supplier and distance—many areas see free delivery shown at checkout. Tailgate spreading can be requested at checkout, but it is performed at the driver’s discretion and is not guaranteed.

Many Palisades driveways use crushed stone (for example 3/4u0022 crushed or #57 stone) or crusher-run (a mix of fines and larger pieces) for good compaction and drainage; decorative pebbles or river rock are used as top layers for appearance. Crushed base materials and crusher-run are usually the most economical (often $20–$45/ton), while washed or decorative stones cost more (commonly $40–$75/ton). Regional sourcing affects availability and price, so check product options and photos for your area at checkout.

Use this quick formula: cubic yards = (area in sq ft x depth in inches) / 324, then multiply cubic yards by 1.3–1.5 to convert to tons (material-dependent). Always round up and order 5–10% extra for compaction and waste, and remember Hello Gravel’s 3-ton minimum. If you’re unsure, use our online calculator or contact our team with project dimensions so we can recommend an amount that avoids both shortfalls and unnecessary excess.