Fill Dirt in North Lakes, NC

Generally, raw fill-dirt is cheaper per cubic yard than most gravel types because it is made of fines and subsoil rather than crushed stone. Prices vary by supplier and haul distance in North Lakes, but expect fill-dirt to be the lower-cost option for bulk grading and backfill jobs.

Not usually. Fill-dirt is designed for building grade and compacting under lawns and foundations, while gravel is for drainage and structural bases; using gravel where compactable soil is needed can cause settling or drainage issues. For projects that need load-bearing or drainage properties, consider engineered base materials rather than swapping one for the other.

Costs change with supplier, order size, and distance from local pits, but a typical ballpark for North Carolina fill-dirt is about $10 to $30 per cubic yard delivered, or roughly $12 to $25 per ton depending on moisture and compaction. For an accurate delivered price to North Lakes, enter your zip code on our site or request a quote so local suppliers and trucking costs are included.

A 10-yard tri-axle load of fill-dirt in the North Lakes area will generally fall in a broad range depending on supplier and drive time; expect total cost (material plus delivery) commonly between about $250 and $700. For an exact number, get a Hello Gravel quote for your address—delivery fees, site access, and order timing all affect the final price.

No. Compacted fill-dirt does not harden like concrete and will rut, erode, and settle under vehicle loads. If you want a lower-cost driveway base, use a compacted crushed stone or crusher-run product designed for vehicle traffic; those perform much better than fill-dirt for driveways and pads.

Materials that mimic a rigid base are crushed stone with fines (crusher-run), dense-graded aggregate, or stabilized/compacted aggregate that locks together when compacted—these are suitable for driveways. Fill-dirt is not in this category: it is intended for raising grade and backfill, not as a wearing or load-bearing surface.

No. Fill-dirt retains water and will not provide reliable subsurface drainage. For drainage trenches or French drains you should use clean gravel or crushed stone and perforated pipe; leave fill-dirt for restoring grade above a properly installed drainage system.

Soil density varies, but a common rule is that 1 cubic yard of loose fill-dirt is about 1.2 to 1.4 tons, so one ton is roughly 0.7 to 0.85 cubic yards. To estimate needed cubic yards: area (sq ft) x depth (in inches) / 324 = cubic yards; multiply cubic yards by ~1.3 to get an estimated tonnage and round up to account for settling.

Hello Gravel’s minimum order is 3 tons, and that is the easiest way to get standard delivery to North Lakes. Some local suppliers may accept smaller loads (1–3 cubic yards) but often charge extra for short loads or apply a minimum delivery fee; check your zip code on our site or request a quote to see available options and any small-load charges.

Clear a stable drop zone with truck access, mark underground utilities and note any low-hanging wires or tight turns, and identify a preferred placement area in the order notes. If you need tailgate spreading, request it at checkout and know the driver will decide on-site if it can be done safely; also check local permits or HOA rules before changing grades.