Fill Dirt in Matthews, NC

Delivered fill dirt in Matthews commonly ranges from about $15 to $35 per ton, depending on local availability, moisture, and whether delivery fees apply. Using a practical conversion (about 1.25 tons per cubic yard for typical loose fill dirt), that equates to roughly $19 to $44 per cubic yard. Prices fluctuate by supplier and season, so get a zip-code-specific quote through Hello Gravel for an exact delivered price.

Hello Gravel works with a network of local suppliers and independent pits that serve Matthews and the greater West North Carolina/Charlotte area, so exact sources vary by zip code and inventory. Instead of naming a single quarry, we recommend checking availability on our site or contacting our team so we can connect you to nearby suppliers who deliver to your address. Regional sourcing means color and texture can differ depending on the supplier.

Most dump trucks used by our haulers are tri-axle trucks that typically carry roughly 10 to 14 tons of fill dirt, which is about 10 to 12 cubic yards depending on the material. Hello Gravel's minimum order is 3 tons, but many customers order a full truck when they need larger fills. If you need less than a truckload, we can still deliver multiple small orders or recommend local suppliers.

Many yards around Matthews have clay-rich soils that hold water and drain slowly, which increases the risk of settlement and poor bearing if you simply place non-engineered fill. For landscaping and light fills, use well-graded fill and ensure proper slope and drainage away from structures; for driveways or building pads, contractors often import compactable granular fill or a structural fill mix to improve stability. Always consider a soil test for structural projects so you pick the right fill material and compaction strategy.

Small yard fills and minor grading commonly do not require permits, but any work that regrades drainage patterns, affects nearby waterways, or involves large volumes can trigger permit and erosion-control requirements from the Town of Matthews and Mecklenburg County. Before large deliveries or major regrading, contact the Town of Matthews Planning & Zoning office and Mecklenburg County Stormwater to confirm local thresholds and required erosion-control measures. When in doubt, get a quick pre-approval or permit check so you avoid stopping work after delivery.

For driveways and building pads, place fill in 4 to 6 inch lifts and compact each lift until it is firm and resists hand-tamping; small areas can be compacted with a vibratory plate compactor, while larger areas typically require a roller or sheepsfoot compactor. For structural pads, contractors commonly aim for high relative compaction (consult an engineer or local contractor for exact percent targets). Proper moisture control during compaction is also important in Matthews because wet clay conditions can prevent effective compaction.

Matthews gets heavy summer rains and occasional freeze-thaw periods that can increase erosion and settling of newly placed fill, especially on slopes or poorly drained sites. To reduce issues, schedule deliveries during drier windows, install temporary erosion controls (silt fence, straw), and finish with proper grading and drainage so water runs away from structures. For long-term performance, add surface material (topsoil and sod, gravel) and maintain drainage features after installation.

Hello Gravel often offers free delivery in many areas, but delivery fees can apply in some locations or for small orders—your checkout quote will show any fee before purchase. Tailgate spreading is available at the driver's discretion and may incur an extra charge; contractor spreading and grading rates vary, but landscapers or excavation crews in the Matthews/Charlotte area commonly charge by the hour (roughly $50 to $100 per hour) or provide a per-cubic-yard spreading quote—get multiple bids for accuracy. For precise costs, request a delivered price plus any spreading or installation quote through Hello Gravel or from local contractors.

Calculate cubic yards by multiplying area (sq ft) by depth (ft) and dividing by 27: cubic yards = (square feet * depth in feet) / 27. For example, to raise 1,000 sq ft by 4 inches (0.333 ft) you need about 12.3 cubic yards, which is roughly 15 to 16 tons of fill dirt using a practical conversion of about 1.25 tons per cubic yard. Use Hello Gravel’s material calculator or contact our team for help converting volumes to tons and choosing the right amount for Matthews conditions.