Fill Dirt in Meadowbrook, NC

Yes—fill-dirt is generally cheaper than decorative or crushed gravel in Meadowbrook because it is a basic, low-organic soil used for raising grade and backfill. Typical local prices vary by supplier and season, but fill-dirt usually runs lower per cubic yard than most gravel products; check your zip code on Hello Gravel for current local rates.

Sometimes, but they serve different purposes. Gravel provides drainage and a stable base where water movement is needed, while fill-dirt is used to build up grade and support lawns or foundations; using gravel where dirt is expected can create drainage paths and make landscaping or planting difficult.

Costs vary by supplier, moisture content, and haul distance, but Meadowbrook customers typically see fill-dirt priced in the range of about $15 to $40 per cubic yard. That translates roughly to the same material costing about $12 to $31 per ton assuming about 1.3 tons per cubic yard; for an exact quote enter your zip code on Hello Gravel.

Most Hello Gravel deliveries use tri-axle dump trucks that carry roughly 10 to 12 cubic yards loose. Multiply the load size by your local unit price (for example, 10 yd3 at $20/yd3 = $200) and remember our minimum order is 3 tons and delivery fees or next-day charges may apply.

No. 'Poor man’s concrete' usually refers to compacted crushed stone, gravel, or a mix of coarse material that locks together, not fill-dirt. Fill-dirt does not harden like concrete; it is intended for raising and filling and should be compacted in layers rather than treated as a structural paving material.

No—standard fill-dirt will not harden like concrete. While compaction makes fill-dirt firm, it remains soil and will not gain the rigid, load-bearing properties of cured concrete or interlocking crushed stone.

Small 50 lb bags are uncommon for fill-dirt but used for small spot fixes; a 50 lb bag is only a few tenths of a cubic foot and will cover a few square feet at a shallow patching depth. For any meaningful grade work in Meadowbrook it's more cost effective to order by the cubic yard.

Using a typical conversion of about 1.3 tons per cubic yard, one ton equals roughly 0.77 cubic yards. That covers about 80 sq ft at 3 inches deep or about 40 sq ft at 6 inches deep; use the formula cubic yards = area (sq ft) x depth (in) / 324 to calculate exact needs.

Price depends on local unit rates, but as an example: at $15 to $40 per cubic yard a 10-yard load would cost roughly $150 to $400 before delivery fees. For a firm price enter your Meadowbrook zip code at checkout—Hello Gravel shows local supplier pricing and available delivery windows.

It depends on depth. For example, at 3 inches deep you need about 9.3 cubic yards (1000 x 3 / 324), which is roughly 12 tons using 1.3 tons/yd3. If you need a different depth, use cubic yards = area (sq ft) x depth (in) / 324 and then multiply by ~1.3 to convert to tons.

Clear vegetation and organic topsoil from the area that will receive fill, mark utility lines and desired grade, and provide a clear, firm access point for the dump truck. Communicate placement preferences in Order Notes and expect the driver to place material where safe; consider renting a compactor and placing fill in 4 to 6 inch lifts for proper compaction.

Hello Gravel coordinates local suppliers and tri-axle trucks for delivery with a minimum order of 3 tons and standard lead time of 2+ business days; next-day delivery may be available for orders placed before noon CST for an extra fee. Drivers may offer tailgate spreading at their discretion, so request it at checkout but do not rely on it as a guaranteed service.