Fill Dirt in Gates, NC

Delivered fill dirt prices in Gates typically range by supplier and season. Expect roughly $12 to $25 per cubic yard (about $8 to $18 per ton) delivered, though low-volume orders and next-day service can add fees. Use our calculator or request a local quote for a precise delivered price to your ZIP code.

Local landscaping suppliers, excavation contractors, and regional quarries serve Gates through dump-truck delivery. Hello Gravel lists partners in the area with a minimum order of 3 tons on our platform; individual suppliers may set higher minimums or require a full truckload (typically 10 to 15 cubic yards).

A 20x30 ft area at 6 inches requires about 300 cubic feet, which is 11.1 cubic yards. Fill dirt weighs roughly 1.2 to 1.5 tons per cubic yard, so plan for about 13 to 17 tons and order a little extra (10% is common) to account for compaction and settling.

Yes. Gates sees seasonal rain and winter freezes that can cause wetting, settling, and freeze/thaw movement in fill dirt. For grading and driveways, compact fill in lifts, add drainage where water collects, and avoid using plain fill dirt as a final surface in areas prone to standing water.

Contractor costs vary by job size and equipment; expect labor and equipment to range from about $50 to $150 per hour for small projects. If contractors charge per ton, installation and compaction can run roughly $5 to $15 per ton depending on access and site prep; always get local written estimates before work begins.

Minor landscaping uses of fill dirt often need no permit, but significant grading, changes to drainage, or adding fill for septic systems can require county permits or reviews. Check Gates County planning and building offices before starting larger projects to avoid fines or rework.

Fill dirt is compactable subsoil good for bulk raising and backfill but has little organic matter and poor surface drainage for driveways. Crusher run or crushed stone are better for driveway bases because they compact and shed water; topsoil is best for planting. For erosion control on slopes, use engineered soils, geotextile, or mulch blankets rather than raw fill dirt alone.

Fill dirt is generally available year-round from local suppliers and quarries, but deliveries can be delayed during heavy rain, saturated ground, or winter freeze conditions. Seasonal demand and local quarry schedules can affect lead time, so check delivery availability when you order.

Fill dirt used as a base will settle over time; expect some settlement in the first season and plan for regrading or adding material within 1 to 3 years. For driveways, put a proper crushed-stone base over compacted fill and expect periodic maintenance (regrading, adding stone) every few years depending on traffic and local weather.

Contractors in West North Carolina typically use fill dirt for bulk grading but avoid placing it without controls on steep, erosion-prone slopes. Preferred methods include placing fill in 6-8 inch lifts with compaction between lifts, using geotextile or terracing on steep slopes, and combining fill with proper drainage and vegetation to reduce erosion.

Provide the delivery address and access details (gate height, driveway width, overhead wires), the desired delivery date, and any location notes where you want the pile placed. If you need spreading or special placement, request tailgate spreading at checkout and note that drivers will assess feasibility on arrival; Hello Gravel's minimum order is 3 tons.