Fill Dirt in Dobson, NC

Typical delivered prices for fill dirt around Dobson run about $12–$30 per ton (roughly $10–$25 per cubic yard), depending on volume, supplier, and haul distance. Hello Gravel's minimum order is 3 tons and standard delivery is 2+ business days; next-day delivery is available for an extra fee if ordered before noon CST. Small-load or short-haul deliveries in the Dobson area may add a service fee of about $50–$150. For an exact quote, check your zip code on Hello Gravel or contact our sales team.

Fill dirt is useful for raising grades and backfill, but performance depends on composition and drainage. Dobson sees occasional freeze–thaw and heavy rains, and some local areas have clay soils that can hold moisture and cause settling or poor drainage if fill contains high clay or organic material. For wetter or frost-affected spots, use well-graded, compactable fill, provide positive drainage, and consider a crushed-stone layer or geotextile for load-bearing areas. If you have a drainage-prone site, ask our team for supplier options with better-draining mixes.

To raise 1,000 sq ft by 6 inches you need about 18.5 cubic yards (1,000 × 0.5 ft ÷ 27 = 18.52 yd3). In this region fill dirt typically weighs about 2,000–2,600 lb per cubic yard, so you should expect roughly 18–24 tons for that volume; local contractors commonly use a rule of thumb of 1.1–1.3 tons per cubic yard to account for moisture and compaction. Use Hello Gravel's material calculator or request a local conversion for a precise delivered tonnage.

Local contractors compact fill dirt in thin lifts—usually 4–6 inches—using a plate compactor or roller and check that each lift is uniformly compacted before adding more material. For driveways and garage pads they typically place a 4–6 inch crushed-stone or gravel base (and sometimes geotextile) beneath the fill because raw fill dirt alone is not ideal for load-bearing surfaces. For landscaping and grade adjustments, finish with proper slope for drainage, proof-roll the area, and avoid using fill that contains organic matter near structures. If the project carries loads, consult a local contractor or engineer for thickness and compaction targets.

Common alternatives locally include crushed stone (best for structural bases and drainage), clean fill (screened, low-organic material for structural fills), and topsoil (for planting and lawns). Crushed stone typically costs more per ton than raw fill dirt but gives much better drainage and compaction for driveways or slabs; topsoil is more expensive and unsuitable as structural fill because it contains organics. Choose fill dirt for bulk grade-raising and non-structural backfill, crushed stone or clean fill for load-bearing work, and topsoil for planting beds.

Hello Gravel connects you with local suppliers and hauling partners that serve Dobson and Surry County; many accept the platform's 3-ton minimum and deliver with tri-axle trucks. Independent landscape supply yards and small haulers nearby sometimes offer smaller loads (1–3 cubic yards) but often charge a short-haul or service fee in the $50–$150 range depending on distance and driveway access. To see exact supplier options, minimums, and delivery fees for your address, enter your zip code on Hello Gravel or contact our sales team for a customized quote.