Stone in Philadelphia, MO

Delivered price varies with supplier distance and stone type, but in West Missouri you can generally expect roughly $30 to $60 per ton (about $45 to $90 per cubic yard) as a ballpark. Hello Gravel requires a 3-ton minimum order and uses local dump trucks (typically tri-axle), and small towns like Philadelphia may see additional delivery fees if the closest supplier is farther away. For an exact total, enter your zip code or request a quote so we can check supplier availability and confirm delivery charges.

A 10-cubic-yard load in West Missouri will commonly fall in the $450 to $900 range delivered, depending on stone type and distance. For a typical single-car driveway (about 10 ft wide by 40 ft long), 10 cubic yards is usually more than enough; you often need about 3.5 to 5 cubic yards for a 3- to 4-inch surface depending on compaction and base needs.

A 20x20 driveway is 400 square feet. At 3 inches deep you need about 3.7 cubic yards (≈5.2 tons using 1 cubic yard ≈1.4 tons); at 2 inches it's about 2.5 cubic yards (≈3.5 tons). Because Hello Gravel has a 3-ton minimum, a 3-inch cover will usually meet the minimum; delivery cost will depend on supplier distance but expect the per-ton/per-yard ranges listed earlier and ask for a quote to get an exact delivered price.

Stone needed depends on driveway width. A single-car 10 ft by 40 ft driveway is 400 sq ft (same as 20x20) and needs roughly 2.5 cy at 2 inches, 3.7 cy at 3 inches, or 4.9 cy at 4 inches. For a two-car 20 ft wide driveway (800 sq ft) double those amounts; convert to tons by multiplying cubic yards by about 1.4 to estimate weight for ordering.

Two inches is very thin and generally not recommended for driveways that see vehicle traffic; it can shift and rut. For most residential driveways in West Missouri we recommend a compacted 3 to 4 inches of stone as a surface layer over a well-prepared base, and a heavier-use driveway should have a 4 to 6 inch compacted stone base with a 2-3 inch wearing layer on top.

You can lay stone over grass, but it is not best practice for a durable driveway; vegetation will decompose and the surface will settle unevenly. Proper prep usually means removing sod and topsoil and adding a compacted base or geotextile fabric; excavation increases labor and disposal costs, so factor that into your project and ask Hello Gravel or a local contractor for recommendations and quotes.

u0022Stoneu0022 is a broad term; crushed stone refers to angular rock fragments produced at a quarry and often sold in specific sizes. For a firm driveway in West Missouri, a crushed 3/4-inch base with some fines or a mix like #411 (or your local equivalent) compacts well and provides a stable surface; availability and naming can vary regionally, so check photos or ask the supplier for the local product best for driveways.

Stabilization options include compacting with a mechanical plate or roller, using geotextile fabrics, resin or polymer binders that lock aggregate, and permeable paving grids. Costs vary widely by method and area; simple compaction and fabric are relatively low-cost, while resin-bound systems and stabilization grids add material and installation costs—get a quote for the exact product and installation cost for Philadelphia-area suppliers.

Hello Gravel's minimum order is 3 tons and we typically deliver with local tri-axle dump trucks, which often carry roughly 10 to 12 cubic yards depending on material. Small towns can incur extra fees when suppliers or haulers must travel farther; free delivery applies in many areas but not all, so check your zip code at checkout or request a quote to see any rural delivery charges.

Suppliers calculate volumes in cubic yards using the formula (area in sq ft x depth in ft) ÷ 27, then convert to tons using a local density (a common rule of thumb is about 1.4 tons per cubic yard for crushed stone). Hello Gravel provides a material calculator on the site and our team can produce a quote if you give driveway dimensions (length, width, desired depth) and any prep requirements.