Gravel in Washington, MA

Delivered price varies by type and distance from local quarries, but expect ballpark ranges: crusher run or bank run gravel $25-$50 per ton, 3/4u0022 crushed stone $30-$60 per ton, and pea gravel $40-$80 per ton. Hello Gravel has a 3-ton minimum and regional sourcing means your exact price will depend on local availability, delivery distance, and any access or spreading fees. Request a zip-code quote for an exact delivered price.

Hello Gravel connects customers in Washington and eastern Massachusetts with local quarries, landscape supply yards, and independent haulers across Berkshire and neighboring counties. To see which suppliers serve your address and to get firm pricing, enter your zip code on our site or contact our team for a tailored list and delivery options.

Our platform generally requires a 3-ton minimum order, and deliveries are most often made by tri-axle dump trucks (common capacity about 10-14 cubic yards, roughly 14-20 tons depending on material). Standard delivery is often included at checkout in many areas, but remote locations, long haul distances, restricted access, or requested spreading can add fees. You can see any delivery fees and choose a delivery date during checkout.

For driveways in a freeze-thaw climate we recommend well-graded, angular crushed stone (for example 3/4u0022 crushed stone or crusher run) because it compacts and sheds water better than rounded rock. Use pea gravel or small crushed stone for walkways where comfort underfoot matters, but add a compacted crushed-stone base and good drainage to reduce frost heave. Adding geotextile fabric and keeping a crown for runoff will improve long-term performance.

As a rule of thumb 1 cubic yard of gravel weighs about 1.4 tons. For a typical single-car driveway (10x20 ft) you need roughly 3.5 tons at 4u0022 depth and about 5.2 tons at 6u0022; a two-car (20x20 ft) driveway is about 6.9 tons at 4u0022 and 10.4 tons at 6u0022. For a 12x24 ft area plan on about 5.0 tons at 4u0022 and 7.5 tons at 6u0022, and for 20x40 ft expect roughly 13.8 tons at 4u0022 and 20.7 tons at 6u0022; increase depth to 6u0022 or more in frost-prone spots or for heavy vehicles.

Permitting requirements vary by town; many small Massachusetts towns require a driveway permit from the Highway Department or approval from the Board of Selectmen, especially if you alter a curb cut or drainage. You may also need to consult the Conservation Commission if work affects wetlands or buffer zones, so check with Washington town hall before starting. If in doubt, contact the town clerk or highway superintendent for current local rules.

Routine maintenance like grading and filling low spots is typically needed every 1-3 years; heavy-use driveways may need attention more often. For top-dressing, a 1/2u0022 to 1u0022 layer is common; that equals about 0.2 to 0.4 tons per 100 square feet per application, so a 400 sq ft drive would need roughly 0.9 to 1.8 tons for a 1/2u0022 to 1u0022 top-dress. Regular grading, addressing drainage, and adding material as needed will extend the life of the surface.

Use larger, angular stone for erosion control and drainage: #3 crushed stone, #57 stone, or properly sized riprap at concentrated flow points perform well on slopes. Combine stone with geotextile fabric, swales, check dams, or French drains to slow water and protect soil, and place coarser stone at outlets where flow is concentrated. Local supplier recommendations will account for site slope and soil type.

Gravel (loose or crusher run) is typically the lowest-cost option up front and offers excellent drainage, but it requires regular maintenance and regrading. Asphalt gives a smoother, lower-maintenance surface for moderate cost, while pavers are the most durable and lowest-maintenance long term but are the most expensive. Typical installed cost ranges (approximate) are: gravel $1-$3 per sq ft, asphalt $3-$6 per sq ft, and pavers $10-$30 per sq ft, with regional variation — get a local quote for accurate comparisons.

With proper drainage and regular upkeep a gravel driveway can function well for many years; expect light regrading every 2-5 years and more substantial resurfacing every 5-15 years depending on traffic, weather, and upkeep. Resurfacing cost is driven by tonnage and local material/delivery rates — for example, a 1,000 sq ft driveway might require 10-20 tons of material, so material-only costs will vary by the per-ton price in your area plus spreading/compaction labor. For exact costs get a site-specific quote through Hello Gravel or a local contractor.

Start at hello-gravel.com, enter your zip code, choose the gravel type and quantity (remember our 3-ton minimum), and pick your preferred delivery date in the checkout calendar. For help estimating quantities or with tight access, call 855-241-8884 or text 844-407-3734 and our team will help match you with local suppliers and confirm delivery details.