Stone in Riverside, FL

Prices vary with stone type, supplier, and delivery distance. In the Riverside/Jacksonville area a full tri-axle load (roughly 10-12 tons) commonly falls in the $350 to $900 range delivered, while smaller orders (3-6 tons) often cost more per ton. Hello Gravel requires a 3-ton minimum and shows exact pricing for your zip code at checkout, so get a quote for an exact number.

A 20 ft x 10 ft area at 4u0022 depth is about 2.47 cubic yards, which converts to roughly 3.5 tons of crushed stone using the common conversion of 1 cubic yard ≈ 1.4 tons. We recommend ordering at least 10% extra to allow for compaction and waste, so plan on 4 to 4.5 tons for that footprint in Riverside.

Using 1.4 tons per cubic yard, 20 tons is about 14.3 cubic yards, which will cover roughly 1,150 square feet at a 4u0022 depth. Yes—order extra: plan on 5-15% more material to allow for compaction, settling, grading waste, and uneven subgrades; larger or rough sites should use the higher end of that range.

A 20 ft x 20 ft driveway at 4u0022 needs about 7 tons of stone (≈5 cubic yards). Material plus delivery in the Riverside area often runs from about $200 to $700 depending on stone grade, supplier, and truck distance; exact pricing is location-specific so use Hello Gravel to check your zip code and delivery options.

Crushed stone is usually the better choice for driveways in Riverside because angular pieces lock together and compact to form a stable surface, while smooth river rock does not compact well and shifts under traffic. Crushed stone is commonly available locally, typically more cost-effective per ton for driveways, and offers better traction and durability in Florida's rainy climate.

Yes—stone gravel compacts with mechanical equipment (plate compactors or rollers) and can be stabilized with geotextile fabric, stone dust binders, or polymer stabilizers that create a firmer surface closer to a paved look. Many local contractors in the Jacksonville/Riverside area offer spreading, compaction, and stabilization services; Hello Gravel can deliver the material but spreading is at driver/contractor discretion and should be arranged separately for guaranteed installation.

For most driveway or landscaping projects in Riverside, bulk delivery by the ton or cubic yard is the most cost-effective option once you need 3+ tons—Hello Gravel's platform is set up for that. Pickup is viable for very small jobs, while bagged stone is the most expensive per cubic yard and best only for tiny projects or retail availability; bulk orders also commonly qualify for lower per-ton pricing.

Most local suppliers and haulers will deliver material to Riverside addresses; many can also provide spreading and compaction for an extra fee or via a third-party contractor. Labor rates vary, but typical spreading/installation rates in the region commonly run from about $75 to $150 per hour or a flat fee per job—get a written quote up front and confirm whether tailgate spreading is included, since Hello Gravel drivers may only spread at their discretion.

A common, reliable build-up is: compacted larger angular stone or crushed rock for sub-base (1u0022 to 2u0022 range or crushed road base), #411 (a mix of 3/4u0022 stone and fines) as an intermediate binder that compacts well, and #57 (about 3/4u0022) as a top layer for good drainage and traction. In Riverside's sandy soils and wet climate, using a geotextile fabric under the base and including a binder layer (#411 or stone dust) improves stability and reduces rutting.

Yes—check city of Jacksonville permit rules and any HOA covenants for driveway materials, setbacks, and impervious surface limits before ordering. Also plan for proper drainage: slope away from structures, maintain stormwater flow, and prepare a stable subgrade; in low-lying or flood-prone areas of Riverside you may need extra base depth or engineered solutions to prevent washout.