Gravel in Arlingwood, FL

A delivered dump truck load to Arlingwood typically ranges widely based on gravel type and distance from the local supplier. Expect roughly $500 to $1,500 for a tri-axle load (materials plus delivery) for common gravel types, with lighter, decorative gravels toward the higher end and bulk crusher-run toward the lower end. Hello Gravel requires a 3-ton minimum and will show exact pricing for your zip code at checkout.

Installed costs depend on length, base prep, and local labor rates, but for a typical 20-foot-wide driveway that is 50 feet long (1,000 sq ft) plan on about $2,000 to $5,000. That range covers material, delivery, grading, compaction, and basic edge restraint; tougher site work, permitting, or heavy grading will increase the price. Get a site-specific estimate through Hello Gravel or ask local contractors for itemized quotes.

Coverage depends on depth: 20 tons will cover roughly 2,400 to 2,500 sq ft at a 2-inch top dressing, about 1,600 to 1,700 sq ft at 3 inches, and around 1,200 to 1,250 sq ft at 4 inches. Material cost for 20 tons will vary by type but commonly falls in the $600 to $1,400 range delivered in the Florida region; exact cost depends on the gravel type and local supplier. Always confirm material density and depth before ordering to avoid shortages.

As a rule of thumb, 1 ton of gravel covers about 60 sq ft at 4u0022 depth, about 100 sq ft at 2.5u0022 depth, and roughly 120 to 125 sq ft at 2u0022 depth, because 1 ton is approximately 0.7 to 0.8 cubic yards. To calculate needs: multiply your area (sq ft) by desired depth (in feet), divide by 27 to get cubic yards, then multiply by 1.3 to convert cubic yards to tons (or use Hello Gravel’s calculator for a location-specific estimate). Always round up and account for compaction and waste, especially on clay or uneven Arlingwood sites.

For 1,000 sq ft at a typical 3u0022 to 4u0022 depth, plan on about 10 to 15 cubic yards (roughly 13 to 20 tons) of material. Total installed cost in Arlingwood is commonly between $1,500 and $4,000, depending on material type, how much base work and grading is needed, and local labor rates. For the most accurate price, request a site estimate and delivery quote through Hello Gravel.

Prices vary by supplier and material, but typical Florida ranges are: crusher-run/driveway mix $20 to $45 per ton, crushed stone (3/4u0022) $30 to $60 per ton, and pea gravel $35 to $80 per ton. To convert to cubic yards, multiply by roughly 1.3 (so $25 to $100 per cubic yard is a practical range depending on type). These are regional estimates; check Hello Gravel with your zip code for exact, up-to-date local prices.

A cost-effective and durable choice for Arlingwood is a layered approach: a compacted base of crusher-run or aggregate base (3 to 4 inches) topped with 1 to 2 inches of 3/4u0022 crushed stone or stone dust for good compaction and traction. This combination resists Florida’s heavy rains and traffic better than loose decorative gravels like pea stone, and it usually offers the best life-cycle value. Local sourcing also helps keep delivery costs down, so check available mixes in your area.

For driveways in Arlingwood, crushed stone or crusher-run is generally best because it compacts and locks together, creating a stable surface. Pea gravel is attractive for walkways and decorative areas but tends to move and wash in heavy Florida rain, so it is not ideal as the primary driveway surface. Hello Gravel connects you to local suppliers and haulers who can deliver the right materials; for installation, ask for local contractor referrals or request delivery only and arrange installation separately.

A 20x20 pad is 400 sq ft; at a 3u0022 depth you would need about 3.5 to 4.0 cubic yards (around 5 to 6 tons). Expect total installed costs in Arlingwood to be roughly $600 to $1,500 depending on site prep, compaction, edging, and material choice. Easy-access, flat sites are at the low end, while sites needing excavation, drainage work, or heavy compaction will cost more.

Hourly rates vary: $100/hour is on the higher side for basic landscaping labor in the region but can be reasonable if that rate includes an experienced operator with equipment or specialty work. Many contractors prefer to give flat or per-square-foot quotes for gravel installs, which provides clearer expectations for homeowners. We recommend getting at least two itemized quotes and asking for a flat price that lists materials, delivery, and labor separately.

Typical local dump trucks used by Hello Gravel suppliers are tri-axle trucks that can carry about 10 to 14 tons, but truck capacities vary by vendor and material. Hello Gravel’s minimum online order is 3 tons, and the checkout will show available truck sizes, delivery options, and any fees for your Arlingwood zip code. If you need a partial load or special delivery placement, note it in Order Notes and our team will do their best to accommodate.