Fill-dirt in Wellington, CO

For 1,000 sq ft: 2u0022 depth needs about 6.2 cubic yards (roughly 7–9 tons), 3u0022 needs about 9.3 cubic yards (roughly 11–14 tons), and 6u0022 needs about 18.5 cubic yards (roughly 22–28 tons). These numbers assume typical fill-dirt density and do not include compaction; order an extra 5–10% to account for settling and compaction.

In Wellington, basic fill-dirt delivery commonly ranges from about $10 to $30 per ton (roughly $15–$40 per cubic yard), depending on haul distance and material quality. Spreading and compaction are additional and typically run from about $50 to $150 per hour for equipment and operator or roughly $0.50–$2.00 per sq ft depending on site access and scope; get a quote for exact pricing. Note: Hello Gravel has a 3-ton minimum order, standard 2+ business day delivery, and next-day options for orders placed before noon CST.

For Wellington's freeze-thaw conditions and local clay soils, a more granular, well-draining fill (sandy-silt with some gravel) performs better than pure clay, because it reduces frost heave and improves drainage. Screened fill-dirt with low organic content is a common choice for grading and foundations; reclaimed fill can vary and should be tested before use. For critical or structural projects, consider engineered fill or consult a geotechnical engineer to specify material and layering.

Yes. Hello Gravel connects you with local suppliers and contracted haulers that service Wellington and Larimer County. We can provide delivery-only quotes and help identify local contractors who offer spreading and compaction; contact our team or use the checkout to add spreading requests and note site access details. Always confirm equipment, insurance, and references with any contractor you hire.

Local regulations may apply. The Town of Wellington and Larimer County have rules about grading, stormwater management, and large earth-moving that can require permits for significant fills or slope changes; HOAs may have surfacing or material requirements for driveways. Before ordering, check with the Wellington Town Building Department, Larimer County permits, and your HOA guidelines to confirm any restrictions or permit needs.

Engineers typically specify compaction targets in the 90–95% range of standard Proctor for base material; in practice aim for at least 90% to reduce future settlement. Place fill in thin lifts (usually 4–6 inches) and compact each layer; expect 5–15% volume reduction from compaction and moisture loss, so order extra. Long-term maintenance includes monitoring drainage, regrading low spots after freeze-thaw seasons, and topping the surface (gravel or topsoil) to prevent erosion and reduce tracking of fines.

Mark utility lines and clear an accessible drop zone before delivery; tri-axle dump trucks are common and require good turning radius and load-bearing access. Note driveway weight limits, requested delivery date, and whether you want the driver to tailgate-spread (driver discretion only). Use Order Notes at checkout to describe access and call our team for help sizing the delivery and arranging next-day service if needed.