Gravel in Lost Hills, CA

Common sizes include fines and screenings (very small particles), 1/4u0022 to 3/8u0022 pea gravel, 3/4u0022 (commonly called #57), and larger stones like #3 (about 1.5u0022 to 3u0022). Smaller sizes are good for decoration and walkways, while 3/4u0022 (#57) is a popular choice for driveways and drainage because it compacts well and sheds water. Local suppliers serving Lost Hills may offer slightly different size ranges and colors based on regional geology, so check photos or ask your supplier before ordering.

#57 gravel is roughly 3/4u0022 in size and is a mix of crushed stone and coarse sand that packs well while still allowing drainage. It is commonly used for driveways, walkways, drainage fields, and as a base beneath pavers. In Lost Hills' dry climate, #57 is a practical choice where good drainage and a stable driving surface are needed.

Prices vary by material, supplier, and delivery distance, but for Lost Hills you can generally expect a range in the tens of dollars per ton for basic gravel and higher for specialty stone. Local haul and small-town sourcing can keep costs competitive, but the best way to get an exact price is to request a quote for your zip code through Hello Gravel. We can provide transparent pricing including delivery and any local fees.

Hello Gravel deliveries are commonly made with tri-axle dump trucks; a typical tri-axle carries about 10 to 16 tons of gravel depending on material and local weight limits. For very large orders suppliers may use larger trucks that hold 20 tons or more. If you need a specific truck size or a partial load, contact our team to coordinate the right vehicle for your site in Lost Hills.

Coverage depends on depth and rock density, but a practical estimate for the area 1 ton will cover is about 116 sq ft at 2u0022 depth, 77 sq ft at 3u0022 depth, 58 sq ft at 4u0022 depth, and 39 sq ft at 6u0022 depth. These numbers assume typical crushed stone density (roughly 1.4 tons per cubic yard) and are good for planning small projects in Lost Hills. For precise quantities, use our calculator or send your dimensions to our team.

No, 2 inches is usually not enough for a durable driveway. For a residential gravel driveway in Lost Hills you should plan on a compacted base of 4u0022 to 6u0022 of crushed stone (for load-bearing and drainage) and, if desired, an additional 1u0022 to 2u0022 of surface stone. Local soil and subgrade conditions can affect the recommendation, so consider compaction and a geotextile membrane in areas with poor subgrade.

For road or driveway base, larger crushed stone or class II road base (often 1u0022 to 3u0022 minus material) is commonly used for stability, while a 3/4u0022 stone such as #57 is often used as the surface layer for traction and drainage. A recommended build-up is 4u0022 to 6u0022 compacted base material with a 1u0022 to 2u0022 surface of #57 for residential drives in arid regions like Lost Hills. Local suppliers can advise on the exact gradation used by area contractors.

Cost depends on width, depth, and material choice. For example, a 20 ft long by 10 ft wide driveway at 4u0022 compacted depth requires roughly 3.5 tons of gravel; at $40 per ton delivered that equals about $140 for material, plus any delivery or spreading fees. Prices in Lost Hills can vary, so get a personalized quote through Hello Gravel to include current material rates and delivery.

#3 gravel typically contains larger stones about 1.5u0022 to 3u0022 across and looks like chunky, angular rock rather than smooth pebbles. It is used for heavy-duty drainage, erosion control, and for creating a coarse base where large voids aid water movement. In Lost Hills you might see #3 used near irrigation channels, on sloped sites, or where strong drainage is needed.

Buying in bulk and ordering direct delivery from a local supplier usually yields the best value, because you avoid retail bagged prices and minimize haul distance. Hello Gravel connects you with regional suppliers and shows upfront pricing so you can compare materials and delivery for your Lost Hills address. Also consider common, locally sourced grades rather than specialty colored or decorative stone to keep costs down.

The cost of a truckload of #57 depends on the truck size and per-ton price; a typical tri-axle load of 10 to 16 tons multiplied by your local per-ton rate gives a quick estimate. For example, at $45 per ton a 12-ton load would cost about $540 for material before any delivery fees. For an exact total for delivery in Lost Hills, request a truckload quote through Hello Gravel and include your delivery location and any access notes.

Drivers may be able to perform tailgate spreading at their discretion; you should request spreading at checkout but know it is not guaranteed. Drivers will assess whether spreading is safe and feasible upon arrival, especially for narrow driveways or steep slopes common around Lost Hills. If spreading is critical, note it in your order and discuss options with our team ahead of delivery.