Gravel in Repton, AL

Local gravel prices vary by type and supplier; expect crushed limestone or #57 crushed stone around $20 to $45 per ton, and pea gravel around $25 to $60 per ton. A good rule is 1 cubic yard of gravel is roughly 1.3–1.5 tons, so multiply the per-ton price by about 1.4 to estimate per-cubic-yard cost. Prices depend on regional sourcing, truck access, and whether the material is screened or washed.

Hello Gravel’s minimum order is 3 tons; many areas in West Alabama have free or low-cost standard delivery, but fees commonly range from $0 to $150 depending on distance, driveway access, and truck routing. Standard delivery requires 2+ business days; next-day delivery is available for orders placed before noon CST for an extra fee. Tailgate spreading may be possible but is at the driver’s discretion and not guaranteed.

For clay soils and heavy summer rains, use angular, larger crushed stone such as 3/4u0022 to 1-1/2u0022 crushed stone, #57 stone, or riprap for steep slopes because they lock together and shed water. A layer of coarse stone over a geotextile fabric helps prevent soil migration and improves drainage. Smaller pea gravel looks nice but can wash away on slopes unless combined with edging and a proper base.

For most Repton driveways, install a compacted subbase of 4–8 inches of crushed stone or road base, then add a 2–3 inch wearing course of crushed gravel or #57 for a 1-car driveway. For a 2-car driveway or higher traffic, use a 6–8 inch compacted base plus a 3–4 inch surface course. Proper compaction with a plate compactor or roller and good edge restraints reduce rutting and washout.

Use area (sq ft) x depth (in) / 324 = cubic yards, and assume 1 cu yd ≈ 1.4 tons. A 12x30 driveway (360 sq ft) needs about 3.3 cu yd (≈4.7 tons) at 3 in and 6.7 cu yd (≈9.3 tons) at 6 in; add 10–15% for grading and compaction waste. A 20x20 patio (400 sq ft) needs about 3.7 cu yd (≈5.2 tons) at 3 in and 7.4 cu yd (≈10.4 tons) at 6 in.

Yes—Hello Gravel works with local suppliers across West Alabama and can often source screened road base or recycled asphalt where it is available from nearby quarries and yards. Availability varies by zip code and quarry stock, so check material options during checkout or contact our team for confirmation. Regional sourcing means materials may differ slightly from photos or samples.

Expect to regrade and compact a gravel driveway once per year or every 1–3 years depending on traffic and rainfall, and to add a fresh 1–2 inches of gravel every 2–5 years. Typical costs are labor for regrading ($50–$300 per visit for a contractor, depending on scale) plus material costs (roughly $20–$50 per ton for common gravels). Regular maintenance like weed control and fixing washed areas reduces major repair needs.

Larger, angular crushed stone (1/2u0022 to 1-1/2u0022) and crushed rock with interlocking sharp edges resist washout better than smooth river pebbles or pea gravel. Using a compacted base, geotextile fabric, proper slope management, and edge restraints dramatically improves washout resistance. For severe runoff areas, consider riprap or a layered system with larger stone upslope and finer wearing surface downslope.

Gravel has the lowest upfront cost—typically the least expensive per square foot—but requires more frequent maintenance and periodic topping. Asphalt is mid-range in cost with a smoother surface and a 15–25 year life with regular sealcoating; concrete costs more upfront but can last 25–40 years with less frequent maintenance. Choose based on budget, desired upkeep, and drainage; gravel is common in rural Repton because of lower cost and easier repairs.

Permit and HOA rules vary: Repton town and county zoning may have requirements, and some HOAs restrict surface materials or appearance. Before installing a gravel driveway, check with Repton town hall or the county planning office and review any HOA covenants. If you’re unsure, contact Hello Gravel or local building officials for guidance on local rules and recommended specifications.