Stone in Jacksonville, AL

In West Alabama, delivered crushed stone for residential projects commonly falls in the range of about $30 to $60 per ton (roughly $45 to $85 per cubic yard), depending on stone size, quality, distance from the quarry, and order size. Small orders and specialty stones (colored or decorative) are usually at the high end; larger orders get better per-ton pricing. For an exact delivered price to your Jacksonville zip code, request a quote through Hello Gravel.

Hello Gravel partners with local quarries and independent haulers around Jacksonville that typically source stone from West Alabama quarries. Delivery radii commonly range 20 to 50 miles for standard loads; some suppliers will travel further for larger orders. Enter your zip code on Hello Gravel to see nearby suppliers and confirmed delivery radii and fees.

For Jacksonville driveways, a compactable base plus a top layer work best: 3/4u0022 crushed stone or #57 for the top wearing layer and a 3/4u0022-to-fines blend (similar to #411 or 21A) for a base that compacts. For patios and walkways, 3/8u0022 to 3/4u0022 decorative crushed stone or a fines-mix works well for firm footing. Avoid rounded river rock for driveways since it does not lock together and migrates more in wet, sloped areas common in West Alabama.

Estimate cubic yards using: area (sq ft) x depth (in) / 324, then convert to tons using about 1.4 tons per cubic yard. Typical examples: a 10x20 driveway at 3u0022 deep needs about 2.6 tons, a 20x40 driveway at 3u0022 needs about 10.4 tons, and a 12x12 patio at 3u0022 needs about 1.9 tons. Always round up for compaction and waste and remember Hello Gravel has a 3-ton minimum order in most areas.

Crushed granite and crushed limestone are common choices in West Alabama; granite is very durable and holds up well under wet conditions and traffic, while limestone is locally common and compacts well but can powder over many years. River rock looks attractive but does not compact, so it moves and drains differently during heavy rain and on slopes. For Jacksonville's climate, choose angular crushed stone (granular limestone or granite) for driveways and areas that need compaction and stability.

Start by removing soft topsoil, install a layer of coarse base stone (4-6u0022) compacted in lifts, and place a nonwoven geotextile between the clay and stone to reduce sinking. Improve drainage by grading to direct water away and adding perforated pipes or surface drains where needed; finish with a 2-3u0022 wearing layer of #57 or similar. These steps reduce rutting and migration in clay-heavy yards common around Jacksonville.

Permits for driveways or major driveway changes depend on the city; Jacksonville may require permits for curb cuts, driveway expansion, or stormwater changes, so check with the City of Jacksonville building or public works office. Many HOAs in West Alabama have aesthetic rules about front-yard surfaces and color; review your HOA guidelines before ordering. If in doubt, ask Hello Gravel and request photos of samples to share with your HOA or permitting office.

Light maintenance like raking, filling low spots, and adding a fresh top coat is usually needed every 1 to 3 years for residential driveways in Jacksonville; heavier refreshes occur every 3 to 6 years depending on traffic and drainage. Lifecycle costs are generally lower up front than asphalt but require periodic topping with 1-3 tons of stone at current local prices; plan for occasional regrading and material replacement rather than sealed resurfacing. Good initial installation with proper base and drainage reduces long-term maintenance in hot, wet West Alabama conditions.

If by stone you mean angular crushed stone, its pros are lower initial cost, excellent drainage, and easier local sourcing; crushed limestone (a type of crushed stone) compacts well but may powder and change color over time. Asphalt gives a smooth, low-maintenance surface but is more expensive upfront and can soften in very hot weather without proper mix or maintenance. For many Jacksonville homeowners, crushed stone offers a cost-effective, permeable option if installed with a good base and drainage, while asphalt is preferred where a sealed, paved look is required.

Yes. Nonwoven geotextile separates the clay subgrade from stone, reducing settlement and mixing; solid edging (metal, stone, or concrete) prevents lateral migration; and stabilization grids or cellular pavers significantly reduce movement on slopes and allow a thinner stone section. For steep or high-traffic slopes common in some Jacksonville neighborhoods, add edging and a stabilization product to extend life and keep material in place.

Order at least 3 tons (our usual minimum) and use the material calculator on Hello Gravel to estimate how much you need; select your preferred delivery date during checkout and add delivery notes for access or drop location. Tailgate spreading may be possible at the driver's discretion—request it in order notes but expect the driver to assess safety on arrival. For exact pricing, sample photos, or to change an order, contact Hello Gravel customer service as soon as possible.