Fill Dirt in Blue Ridge, GA

Prices vary by supplier, delivery distance, and material type, but expect local fill dirt in the Blue Ridge area to be a rough estimate of $15 to $40 per ton delivered. Mountainous terrain and long haul distances can push the higher end of that range, and small orders usually cost more per ton. For an exact price for your address and quantity, get a quote through Hello Gravel.

Hello Gravel deliveries typically use tri-axle dump trucks that carry about 12 to 14 tons of loose fill dirt per load, though actual capacity depends on the truck and how the material is loaded. Smaller tandem or local trucks may carry 7 to 10 tons. We’ll confirm truck type and estimated tons when you request delivery.

Measure the length, width, and desired depth in feet, multiply (length x width x depth) and divide by 27 to get cubic yards. Multiply cubic yards by about 1.3 to convert to tons (regional variability 1.2 to 1.4). Remember to add 5 to 10% extra for compaction, grading waste, and uneven ground, and note Hello Gravel’s minimum order is 3 tons.

Calculate volume: 100 ft x 10 ft x 0.5 ft = 500 cubic feet, which is about 18.5 cubic yards. Using 1.3 tons per cubic yard, you would need roughly 24 tons of fill dirt; add 5 to 10% for compaction and grading, so plan on about 25 to 27 tons. Contact Hello Gravel to order that amount and schedule delivery.

One ton of fill dirt is roughly 0.77 cubic yards (about 21 cubic feet). That covers about 250 square feet at a 1-inch depth, about 125 square feet at a 2-inch depth, and about 42 square feet at a 6-inch depth. Coverage can vary with material compaction and moisture content, so use these as approximate guides.

Generally yes: fill dirt is typically less expensive per ton than finished gravel because it contains more fines and is often locally abundant. However, cost comparisons depend on exact material specs, delivery distance, and intended use—gravel types used for driveways or drainage are more expensive but provide different performance. Get detailed pricing and material recommendations from Hello Gravel for your specific job.

Fill dirt can be used to raise or level the base under a driveway, but it is not a good final driving surface because it compacts and can hold water. For a durable driveway surface in the Blue Ridge area, use a compacted base of structural fill topped with crushed stone or crusher run for drainage and load-bearing. If you plan to use fill dirt under a drive, compact in layers and pair it with a proper subbase and surface material.

Not always. Fill dirt often contains fines and clay that can retain water, and soils around Blue Ridge tend toward clayey mixes in places, which slows drainage. For projects where drainage matters, add a drainage layer of crushed stone or install pipe/drainage solutions, or choose a sandier fill if specified by your contractor.

A single tri-axle load (roughly 12 to 14 tons) can typically range from a few hundred dollars to several hundred dollars depending on price per ton, haul distance, and site access. Using the earlier per-ton estimate of $15 to $40, a full truck could cost roughly $180 to $560 before any special fees. For an accurate delivered price to Blue Ridge, request a quote through Hello Gravel with your zip code and site details.

Order online through the Hello Gravel site by selecting Fill Dirt, entering your zip code, and choosing quantity and a delivery date. If you need to change the order, contact our team as soon as possible; changes are easier before the order is processed or dispatched but cannot be guaranteed. We’ll do our best to accommodate adjustments based on supplier and truck schedules.

Drivers may be able to perform tailgate spreading at their discretion; you should request spreading in the Order Notes at checkout. The driver will assess safety and access when they arrive and may decline if it cannot be done safely. There is no guaranteed spreading service, so plan for renting a skid steer or hiring local help if precise spreading is required.

Blue Ridge sits in a hilly part of North Georgia, and local fill dirt may include more clay, silt, and small rock than fill from other regions, which affects compaction and drainage. Expect natural variation, and add a bit extra for sloped sites and rock removal. If you need a particular texture or drainage profile, note that in your order or ask Hello Gravel for a local supplier recommendation.

Buying in bulk and using local suppliers reduces per-ton cost, and Hello Gravel helps by connecting you with nearby suppliers to lower haul charges. Excavating usable soil on your property or coordinating with nearby sites that need removal can also be economical but may require permits or equipment. Always compare delivered per-ton pricing, minimum order requirements, and any site-access fees before deciding.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.