Gravel delivery in Richmond, VA

For a 20x20 (400 sq ft) drive with a 3u0022 finish layer you will need about 5.2 tons of gravel (roughly 3.7 cubic yards). If you add a compacted crushed-stone base (commonly 4u0022), add about 4.9 tons (about 3.6 cubic yards), bringing the total to roughly 10-11 tons. These are estimates - adjust for exact depth, soil conditions, and compaction; Hello Gravel’s calculator can give a precise number for your site.

Delivered bulk gravel in the Richmond area typically runs in the range of about $35 to $80 per ton, depending on material type (pea, crushed, river rock), order size, and supplier. Hello Gravel has a minimum order of 3 tons and frequently includes delivery in many zip codes; any delivery fees or next-day surcharges will be shown at checkout. For the most accurate price enter your zip code and material choice on our site.

On Richmond’s clay-heavy soils a crushed stone base with angular 3/4u0022 crushed stone (often called #57 or 3/4u0022 clean stone) is best because it compacts and drains well. Use fines or stone dust for a top dressing if you want a smoother finish; avoid loose rounded river rock and pea gravel for main driveway surfaces, as they tend to migrate and rut on sticky clay. Consider adding geotextile fabric and proper drainage to reduce settling and washouts.

Yes, gravel can perform well in Richmond’s climate when installed with a stable, well-compacted base and good drainage. Richmond’s freeze-thaw cycles are moderate, but the area’s clay and heavy summer rains can cause rutting or washout if the base and grading are inadequate. Plan for seasonal maintenance like regrading and topping up material to keep the surface stable.

Gravel has a lower upfront cost than asphalt: gravel driveways often run about $1 to $3 per sq ft installed (materials only vary), while asphalt commonly costs $3 to $7 per sq ft installed, depending on thickness and prep work. Gravel requires more frequent maintenance (regrading, adding stone) while asphalt has higher initial cost but lower routine upkeep. For Richmond properties with clay soils, budget for a proper crushed-stone base with either option to avoid drainage and settling problems.

Hello Gravel connects you with local Richmond suppliers and haulers so you can order bulk gravel online and schedule delivery. Typical bulk pricing in Richmond varies by material: expect roughly $35-$80 per ton delivered, with the lower end for local crushed stone and higher for specialty decorative rock. Enter your zip code on Hello Gravel to see supplier options, exact pricing, delivery windows, and minimum order requirements.

Expect routine maintenance such as annual or biannual regrading, filling ruts after heavy rains, and adding 1-3 tons of gravel every 3-5 years depending on traffic and washout. Over a 10-year period, material and basic maintenance costs typically total a few hundred to a couple thousand dollars, depending on driveway size and how often you add stone or hire grading services. Good initial base work and drainage will lower long-term upkeep costs.

Yes, both can be used, but their suitability depends on use: crushed stone or crushed stone with fines (stone dust) compacts well and makes a firm, stable surface for patios and paths. Pea gravel is comfortable to walk on and attractive for casual seating areas but can migrate, making it less ideal for heavy furniture or high-traffic walkways. For Richmond’s wet conditions, a compacted base and edging are recommended to keep material in place and maintain shape.

Regulations vary by location; within the City of Richmond and surrounding counties you may need permits or approvals for driveway cuts, curb modifications, or changes that affect stormwater runoff. Before installation, check with the City of Richmond Department of Public Works or your county zoning office to confirm setback, curb, and stormwater requirements. Hello Gravel advises customers to verify local rules before scheduling delivery for any project that alters the public right-of-way.

Adding a properly compacted crushed-stone base (commonly 4u0022 or more) can add roughly $0.75 to $3.00 per sq ft for materials and compaction, depending on aggregate type and access for equipment. For a 400 sq ft 2-car drive, expect the base work to add several hundred to over a thousand dollars compared with a simple top-dress install, but it greatly improves longevity and reduces maintenance on Richmond’s clay soils. Ask for an itemized quote so you can compare material, hauling, and compaction line items.