Fill Dirt in Frayser, TN

Generally yes. Fill-dirt is usually less processed than decorative gravel, so it tends to cost less per cubic yard or ton in the Frayser area, but price depends on local supply, delivery distance, and whether the dirt is screened or clean. For an exact price and any delivery fees, check your zip code on Hello Gravel or request a quote.

Not usually. Gravel drains well and makes a stable base for driveways and patios, but it does not compact like clean fill-dirt and can create voids under slabs or lawns in Frayser’s clay- and silt-prone soils. For raising grade, correcting low spots, or backfilling around foundations, choose clean fill-dirt unless a drainage layer is specifically required.

Prices vary by supplier, distance, and whether the material is screened or has debris. As a rough ballpark, clean fill-dirt deliveries in the region often fall in a modest per-yard or per-ton range; the best way to get an accurate number is to enter your Frayser zip code on Hello Gravel and get an upfront quote with delivery options and any minimums.

One ton of fill-dirt is roughly 0.9 to 1.1 cubic yards depending on moisture and compaction. In practice, 1 cubic yard of typical fill-dirt often weighs about 1 to 1.2 tons, so use the approximate conversion when estimating material for Frayser jobs and confirm with your supplier.

Calculate volume: 1,000 sq ft x (4 in / 12 in) = 333 cubic feet, which is about 12.3 cubic yards. Expect roughly 14 to 18 tons of fill-dirt after accounting for density and compaction in the Frayser area; use Hello Gravel’s material calculator or call our team for a precise estimate.

Maybe physically, but probably not safely. One cubic yard can weigh around 2,000–2,500 lbs when moist, which can exceed many pickups’ payload ratings even if it fits in the bed. For safety and convenience in Frayser, delivery by dump truck is recommended—Hello Gravel’s minimum order is 3 tons and we coordinate truck deliveries.

Locally sourced clean fill from excavation contractors can be cheapest, but free or very cheap fill may contain debris or contamination—especially in older Frayser industrial areas. Hello Gravel connects you to trusted local suppliers and shows delivered pricing up front, which helps compare cost versus risk and avoids surprises from hidden processing or disposal fees.

You can spread it, but you shouldn’t if you need a stable, long-lasting surface. In Frayser’s soils, fill-dirt should be placed in thin lifts and compacted to reduce settling and drainage problems; for small projects, ask about tailgate spreading at checkout but expect the driver to decide if it’s safe and practical.

Common downsides include future settling, poor drainage if the fill is clay-rich, and the risk of organic material in unclean fill causing decomposition and sinking. Also, in Frayser you should watch for contamination on older lots—use clean, tested fill-dirt for building pads, lawns, or near foundations.

No—fill-dirt won’t harden like concrete. If you need a firm, load-bearing surface in Frayser, consider crushed stone, compacted aggregate, or soil stabilization (lime or cement) applied by a contractor; fill-dirt is for raising grade and backfill, not as a finished driving surface.

A 5-gallon bucket holds about 0.67 cubic feet. Since one ton of fill-dirt is roughly 24 to 26 cubic feet, you can expect about 35 to 40 five-gallon buckets per ton, with variation from moisture and compaction in Frayser soils.

It depends on bed height and trailer rating, but a 7x14 dump trailer typically carries roughly 4 to 8 cubic yards of material. Weight is the limiting factor with fill-dirt, so confirm your trailer’s GVWR and local road limits in Frayser before loading; for most homeowners, delivered dump-truck loads arranged through Hello Gravel are easier and safer.