Fill Dirt in Glenarden, MD

Prices vary by supplier and current local demand, but delivered fill-dirt in the Glenarden/West Maryland area typically runs as an estimate of about $20 to $50 per ton delivered when you include material and truck fees. Hello Gravel requires a 3-ton minimum and many deliveries are free or charged as a flat truck fee, so per-ton cost falls with larger orders. For an exact price for your address and order size, request a quote through Hello Gravel.

For yard raising choose clean, low-organic, compactable fill-dirt (often called structural or screened fill) rather than topsoil. For driveways in Glenarden's clay and freeze-thaw conditions, do not rely on fill-dirt alone: place a 6u0022 to 12u0022 granular base (crushed stone or crushed gravel) under the driving surface and use fill-dirt only for subgrade/backfill. Always add proper drainage and consider geotextile separation where clay is present.

Convert area and depth to cubic yards: (square feet x depth in feet) / 27. For 1,000 sq ft raised 3 inches: 1,000 x 0.25 / 27 = about 9.26 cubic yards. Multiply cubic yards by a typical fill-dirt weight (about 1.1 to 1.4 tons per cubic yard); using 1.25 tons/yd3 gives roughly 11.6 tons, and you should order 10% to 20% extra to allow for compaction and settlement.

Hello Gravel connects you with local suppliers and contracted dump truck fleets that deliver to Glenarden; our platform’s minimum order is 3 tons. Drivers may offer tailgate spreading at their discretion if requested at checkout, but spreading is not guaranteed; for guaranteed spreading or precise grading, hire a local landscaper or excavating contractor and coordinate with the delivery.

You may need permits for work that changes grading, affects a driveway approach to the public right-of-way, or changes stormwater flow in Prince George’s County. Requirements vary by project size and scope, and HOAs may have their own rules, so check with Prince George’s County permitting or public works before you start. Hello Gravel handles material and delivery but does not manage permits or inspections.

Fill-dirt can help regrade and reduce shallow erosion when compacted, covered with seed or mulch, and combined with erosion control measures (silt fence, blankets, terraces, or planting). On moderate-to-steep slopes or areas with concentrated runoff in Glenarden’s freeze-thaw climate, combine fill-dirt with retaining walls, proper outlet drainage, or engineered solutions; in some cases stone riprap or engineered fill is a better long-term choice.

Contractors typically place fill-dirt in 6u0022 to 8u0022 lifts and compact each lift with a plate compactor for small jobs or a vibratory roller for larger areas. They adjust moisture content before compaction and, for structural or commercial work, follow compaction standards verified by field testing (such as a proctor/compaction test). For homeowner jobs, rent a plate compactor, work in thin lifts, and compact thoroughly to reduce future settlement.

As yard fill, properly compacted fill-dirt can perform for many years, but expect most settlement during the first 6 to 12 months and plan to top up low spots as needed. For driveway bases in Glenarden, fill-dirt alone will degrade sooner under traffic and freeze-thaw cycles—a granular base will last far longer and require less frequent maintenance (typically a few-year interval for topping or regrading depending on use and drainage).

For driveways in Glenarden, crushed stone or a specified aggregate base is the preferred choice because it drains well and resists frost heave. Engineered fill is best for structural or heavily loaded areas where certified compaction and material specs are required. Fill-dirt is appropriate for non-traffic yard raising, backfill, and landscaping where compaction and drainage needs are lower.

Yes. Wet winters and spring thaw in Glenarden can make sites muddy and unstable, which may delay deliveries or prevent drivers from dumping in desired locations; drivers may refuse tailgate spreading in unsafe conditions. Schedule deliveries in drier months when possible, leave an accessible drop zone, and remember Hello Gravel’s standard lead time is 2+ business days with a next-day option for orders placed before noon CST for an additional fee.