Fill Dirt in South Coast Metro, CA

Delivered truckload prices vary by supplier, load size, and site access. In South Coast Metro, expect a typical tri-axle dump (about 10-12 cubic yards) of basic clean fill-dirt to run roughly $300 to $700 delivered, with higher prices for tight access, contaminated/processed soil, or short-notice requests.

Fill-dirt is designed for raising grade and backfilling, not as a wearing surface. In South Coast Metro you should place fill-dirt to build grade and then add a base material (crushed rock or gravel) or a paved surface for a stable driveway; using only fill-dirt will rut and erode, especially with occasional coastal storms.

A standard tri-axle dump truck in California typically carries 10 to 12 loose cubic yards of fill-dirt; larger end-dumps can hold 12 to 15 cubic yards. Weight depends on moisture and composition, but a good estimate is about 1.2 to 1.4 tons per cubic yard, so a tri-axle load is commonly in the ~12 to 20-ton range.

Calculate cubic yards first: cubic yards = (area in ft2 * depth in ft) / 27. For 1,000 sq ft that equals about 9.3 yd3 at 3" depth, 18.5 yd3 at 6" depth, and 37.0 yd3 at 12" depth. Using a typical delivered price range in South Coast Metro (about $35 to $75 per yd3), expect roughly $325–$700 for 3", $650–$1,400 for 6", and $1,300–$2,775 for 12", plus any haul or site-fee adjustments.

Hello Gravel coordinates delivery of fill-dirt to dump on your site, but full installation or grading work is not provided by our delivery partners as a standard service. You can request tailgate spreading at checkout and the driver may help at their discretion, but for controlled placement, grading, or compaction you should hire a local landscaper or contractor; costs will be material + delivery plus the contractor's labor and equipment fees.

For most fill projects in South Coast Metro we recommend using geotextile fabric where native soil is weak or you want to limit mixing, and a layer of compactible base (crushed rock) where drainage or a structural base is needed. Hello Gravel can source geotextile and base materials through local suppliers, but we do not install them; installation and site prep should be done by a contractor familiar with Orange County soils and coastal drainage patterns.

Plain fill-dirt is not formulated to harden or act as a finished surface. If you need a driveway-grade, ask for compactable base materials (crusher fines, engineered base) or inquire about polymer-stabilized aggregate mixes from local suppliers; Hello Gravel can help source those materials, but chemical stabilization and paving are contractor services and will add material and installation costs.

For deliveries into South Coast Metro expect a delivered tri-axle load (10-12 yd3) of standard fill-dirt to typically fall in the $300 to $700 range. Final price depends on exact drop location, curb cuts or site access, material quality (clean vs. processed), and scheduling (next-day or rush deliveries cost more).

Measure the length and width in feet and the desired depth in feet, then use: cubic yards = (length x width x depth) / 27. For quick help, use Hello Gravel's online material calculator or send your project dimensions and delivery address and our team will estimate yards, truck counts, and a delivery quote for South Coast Metro based on local supplier availability.

Hello Gravel does not perform compaction services directly, but we can arrange delivery of compaction equipment through partners or recommend local contractors in South Coast Metro. We can also supply compaction-friendly materials (rock base, crusher fines, or stabilization additives) — material costs vary by type and quantity, and contractor rates for compaction or chemical stabilization should be obtained locally for an accurate job estimate.