Fill-dirt in George, WA

Costs vary by local supply and delivery distance, but a single tri-axle dump truck load of fill dirt in the George area commonly ranges from about $250 to $600. Prices depend on whether material is screened, any rock content, and delivery fees; Hello Gravel shows upfront pricing at checkout and has a 3-ton minimum order.

Generally yes: plain fill dirt is usually cheaper than decorative or crushed gravel because it is less processed. Expect to pay less per ton or cubic yard for fill dirt, but gravel is more suitable for drains and driveways, so choose based on function not just price.

A typical tri-axle dump truck carries about 10 to 12 cubic yards, which in George will often cost in the $250 to $600 range depending on supplier and any local delivery fees. Hello Gravel lists estimated truckloads and pricing in the checkout so you can compare suppliers before ordering.

Per-ton pricing for fill dirt in eastern Washington commonly falls between $15 and $40 per ton, while per-cubic-yard prices are often $20 to $60 depending on compaction, rock content, and screening. Your exact price on Hello Gravel will reflect local supplier rates, delivery distance, and the 3-ton minimum.

Yes. Bulk fill dirt bought by the ton or cubic yard is significantly cheaper than bagged dirt for projects larger than a few bags because you avoid packaging and handling costs. For any multi-cubic-yard project in/near George, bulk delivery through Hello Gravel is more cost-effective.

One cubic yard is a stack roughly 3 ft by 3 ft by 3 ft. Spread 2 inches deep it will cover about 18 square feet; spread 6 inches deep it will cover about 6 square feet, so plan quantities based on desired depth and compaction.

Coverage depends on depth: one ton of typical fill dirt covers roughly 40 to 60 square feet at 2 inches depth, while one cubic yard covers about 18 square feet at 2 inches. Because local material density varies, use Hello Gravel’s material calculator to get a project-specific estimate.

Yes, fill dirt is commonly used to build up low spots and achieve rough grading in yards. For final top surface and planting, you should cap fill dirt with several inches of topsoil; also consider compaction and drainage needs because eastern Washington’s drier climate and native soils may require different grading approaches.

Yes, fill dirt is generally cheaper than screened topsoil because it is not screened or enriched with organic matter. If you plan to grow grass or plants, buy topsoil or add a topsoil layer over the fill dirt to support vegetation.

A standard full-size pickup truck bed holds roughly 1/3 to 1/2 cubic yard loose, so one cubic yard will not fit in most pickups without overloading. For larger quantities, ordering bulk by the yard or ton and arranging dump-truck delivery through Hello Gravel is the safer option.

Minor landscaping projects usually do not need permits, but structural projects (retaining walls, driveways, or significant regrading) may require local permits in Klickitat County or the City of George. For load-bearing or engineered fills, compact the material in lifts and consult a local engineer or building department to ensure compliance.

Fill dirt can be used to build up a subgrade under a gravel driveway, but it should be compacted and free of large organic debris or roots. A typical driveway design uses compacted fill for subgrade, then a 4 to 6 inch layer of crushed gravel or base rock for durability; in arid parts of eastern Washington proper compaction helps prevent settling.

Standard delivery is typically 2+ business days after ordering, with a next-day option available for orders placed before noon CST for an additional fee. Hello Gravel schedules deliveries with local haulers and confirms timing; tailgate spreading may be offered at the driver’s discretion but is not guaranteed.